2011-14 Mustang Nitrous Outlet Plate Hardline System 5.0 by Nitrous Outlet

Nitrous Outlet Mustang 5.0L Plate Specific System
Take your 2011-2014 Mustang GT or Boss 302 into the 10's and quicker with LMR.com and Nitrous Outlet! The 2011-2014 Mustang is a player in stock form, a potent performer with a few bolt-ons, and untouchable on the spray. This kit utilizes a Mustang-specific solenoid bracket & pre-bent stainless hard lines to connect the solenoids to the plate.

Coyote Specific Nitrous Plate
The .75" thick CNC machined billet aluminum nitrous plate is black anodized for great looks & corrosion resistance. The internal fuel and nitrous passages, as well as the discharge passages, are precision drilled for distribution and atomization. It is sealed to the intake using factory o-ring gaskets & will support a 400+ horsepower shot. This nitrous kit is the only 2011-2014 Mustang power added you need.

Nitrous & Fuel Solenoids
A CNC-machined stainless steel body is the basis of the solenoids used in this 2011-2014 Mustang Nitrous System. The heavy-duty coils are encapsulated in Epoxy to resist the elements & vibration. Solenoid lead wires are 14 gauge stranded wires with color-coded insulation. The nitrous solenoid features a .125 orifice, a 1/4" NPT inlet, an 1/8" NPT Purge Port to add a nitrous purge kit, and a 1/8" NPT bottom outlet. The Fuel Solenoid features a .187 orifice and a 1/8" NPT inlet & outlet. Both solenoids will support a 400 horse shot and feature a Lifetime Warranty.

10Lb Nitrous Bottle
The nitrous bottle in the system is a 10Lb capacity bottle covered in a gloss black powder coat. The black anodized high-flow billet bottle valve finishes off the look. The bottle valve also features two 1/8" NPT ports on the side that allow easy additions of nitrous pressure gauges, nitrogen-assisted pressure systems, or nitrous pressure sensors. The nitrous bottle is held in place with dual stainless steel band-type bottle brackets.

Nitrous Jets
Nitrous jets and fuel jets are CNC Machined from brass with a precision ground orifice for the utmost accuracy. Four sets of jets are included in this nitrous kit. These four sets allow for increases of 50, 100, 150, & 200 horsepower.

Fuel Line Adapter
The billet aluminum fuel rail adapter makes tapping into your fuel system a snap for adequate fuel supply for your new 2011-2014 Mustang nitrous system. It is CNC machined for a perfect fit and black anodized for long-lasting good looks. O-ring connections ensured that you had no fuel leaks from the precision piece. It goes between the fuel supply hose and the fuel rail & includes an extra 1/8" NPT port for use with a pressure gauge (gauge not included).

Custom Solenoid Bracket and Pre-Bent Hardlines
Solenoids are mounted to a custom black anodized solenoid bracket that holds the solenoid assembly to the throttle body. The frame provides a sturdy foundation to install the pre-bent stainless steel hardlines. The stainless steel lines are hand-bent to connect the solenoids to the plate fittings.

Additional Parts Included
This 2011-2014 Mustang Nitrous Kit Wet Plate System also includes all the braided lines, fittings, switches, relays, connectors, and hardware you'll need for a basic installation. The kit is adjustable from 50-200 horsepower, but what if 200 horses is not enough for you? Not a problem! You can upgrade the stainless braided feed line, bottle nipple, and solenoid fittings to support over 400 HP! This Mustang nitrous system solenoids can support up to a 400 horsepower shot if your fuel system & engine are up to the task. Additional jetting is required for shots over 200 HP. (Please remember that having a properly built engine & adequate fuel system, and a solid computer tune are all necessities with nitrous.)

Technical Notes

• When installing nitrous on any car, we strongly recommend that you change to a colder set of spark plugs. Also, tune your timing and air-fuel ratio accordingly.
• The included jetting is for gasoline use. If you are running E85, you will need to purchase additional jetting.
• A window switch is strongly recommended for installation.
• This Nitrous Kit includes a WOT microswitch for activating the kit at WOT. For digital TPS activation, We recommend NO-0061001. 

• With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.

• Due to the spacer between the intake manifold and throttle body, modifications to the intake tube and/or other components may be required for proper clearances.

Nitrous Outlet Warranty - Click Here