2007-14 Mustang Nitrous Outlet GT500 & Cobra Jet Plate Kit by Nitrous Outlet

Nitrous Outlet Shelby GT500 & Cobra Jet Nitrous Outlet Plate Kit
Take your 2007-2014 Shelby GT500 or 2011-2016 Cobra Jet powered Coyote into the 10's, and quicker, with LMR.com and Nitrous Outlet! The Shelby GT500 is a player in stock form, a potent performer with a few bolt-ons, and untouchable on the spray. This kit utilizes universal solenoid brackets and stainless braided lines to connect the solenoids to the plate. This is THE nitrous kit you want for your Mustang!

Shelby GT500 & Cobra Jet Nitrous Plate
The star of the show. The .75" thick CNC machined billet aluminum masterpiece is black anodized for great looks and corrosion resistance. The internal fuel, nitrous, and discharge passages are precision drilled for flow and atomization. The design is based on over a year of R&D spanning three different designs before finding the perfect solution. It is sealed to the intake using factory o-ring gaskets and will support a 400+ horsepower shot. This is the only Mustang nitrous plate system you need.

Shelby GT500 & Cobra Jet Nitrous Kit Nitrous & Fuel Solenoids
A CNC-machined stainless steel body is the basis of the solenoids used in this Mustang nitrous system. The heavy-duty coils are encapsulated in epoxy to resist the elements and vibration, while the Solenoid lead wires are 14 ga. stranded wire with color-coded insulation. The nitrous solenoid features a .122 orifice, a 1/4" NPT inlet, an 1/8" NPT purge port for that nifty nitrous purge kit, and a 1/8" NPT bottom outlet. The fuel solenoid features a .187 orifice and a 1/8" NPT inlet and outlet. Both solenoids will support up to a 400 horsepower shot and feature a lifetime warranty.

Nitrous Outlet Nitrous Bottle
The included Nitrous Bottle is of the 10lb variety and is covered in a gloss black powder coat. The billet bottle valve will support up to an 800 horse shot! The bottle valve also features two 1/8" NPT ports on the side that allow easy additions of nitrous pressure gauges or nitrous pressure sensors. The nitrous bottle is held in place with dual stainless steel band-type bottle brackets.

Shelby GT500 & Cobra Jet Nitrous Jets
Nitrous jets and fuel jets are CNC machined from brass with a precision ground orifice for the utmost accuracy. Four sets of jets are included in the nitrous kit, allowing for increases of 50, 100, 150, and 200 horsepower.

Shelby GT500 & Cobra Jet Fuel Line Adapter
The Billet Aluminum Fuel Rail Adapter makes it super easy to tap into your fuel system for adequate fuel supply for your Shelby GT500 and coyote nitrous system. It is CNC Machined for a perfect fit and black anodized for long-lasting good looks. It goes between the fuel supply hose and the fuel rail and includes an extra 1/8" NPT Port for use with a pressure gauge (gauge not included).

Additional Information
This 2007-2014 Shelby GT500 Nitrous kit wet plate system also includes all the braided lines, fittings, brackets, switches, relays, connectors, and hardware you'll need for a basic installation. The kit is adjustable from 50-200 horsepower, but what if 200 horses is not enough for you? Not a problem! The stainless braided lines, black anodized billet aluminum plate, and super duty solenoids included in this Mustang Nitrous System will support up to a 400 horsepower shot if your fuel system and engine are up to the task, and all you'd need to do is order up a new set of jets. (Having a properly built engine, adequate fuel system, and a solid computer tune are necessities for horsepower increases over 150hp.)

Technical Notes

• When installing nitrous on any car, we strongly recommend that you change to a colder set of spark plugs. Also, tune your timing and air-fuel ratio accordingly.
• A window switch is strongly recommended for installation.
• Installation on Cobra jet manifold requires the plate to be rotated 180 degrees for proper fitment.
• This Nitrous Kit includes a WOT microswitch for activating the kit at WOT. For digital TPS activation, We recommend NO-0061001.
• The included jetting is for gasoline use. If you are running E85, you will need to purchase additional jetting.

Disclaimer
With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.

Fitment Note

Due to the spacer between the intake manifold and throttle body, modifications to the intake tube and/or other components may be required for proper clearances.

Nitrous Outlet Warranty - Click Here