Mustang 4 Gauge Power Wire Premium Kit w/ Noise Suppression 3G by PA Performance

Details   |  Description   |  Videos   |  Customer Photos   |  Reviews
Mustang 4 Gauge Power Wire Premium Kit w/ Noise Suppression 3G 9902

Fits 1986-93 3G alternators. Premium kit includes noise suppressor while the standard kit does not.

Item #PA-9902
MPN# 9902

Sale Price: $50.59

Everyday Low Price: $61.99
You Save 18.39 % ($11.40)

In Stock 

Add to cart


  • carries higher loads than factory wire


  • #4 Gauge wire
  • Increased number of wire strands
  • bundle wrapping for noise Suppression

What's in the Box

  • (1) 10' #4 gauge wire
  • (1) Fuse Block
  • (1) 200 Amp Fuse
  • (2) Sheet metal attaching screws
  • (7) Zip ties
  • Install Instructions

Product Description

This is a complete kit to upgrade the main power feed wire from the alternator to the vehicle on most Fords. Basically, the OEM wire from the alternator to the vehicle was not designed to carry the added load of higher amp alternators. If you use the stock wires again or not is your choice, but using this large (#4 Gauge) wire kit will add the safe carrying capacity needed for lengths up to 10 feet. When using our high output alternators you must upgrade this cable to retain warranty coverage.

For vehicles where the alternator and starter relay/battery are on the opposite side of the vehicle, the LONG kit is required. Examples would be 87-93 Fox Body Mustang.

LONG Kits include: large #4 ultra-flexible Stereo Grade wire with sealed 360° crimped terminals, 200 amp in-line fuse and holder with mounting screws, protective wire loom and wire ties to secure it and Instructions with pictures.

Premium kits are made of the highest quality wire, with increased number of strands, electrolytic copper and bundle wrapping to reduce noise in high end sound systems while being incredibly flexible and show quality

These kits can also be used on upgrades utilizing alternators from any other manufacturer with a 3/16-threaded battery (+) stud from the alternator. The ring terminal on the alternator side is 1/4 I.D.

#4 gauge wire kits are recommended on all upgrades but required when upgrading any 1993 or older vehicle with a 130-amp or 200-amp alternator

All kits are provided with 200-amp Littlefuse Brand Fuse and Holder. Based on Littlefuse performance specifications and tolerances this is the appropriate rating. Please do not increase or decrease the fuse amperage value

Red cable shown, actual cable is CLEAR jacket.

By using both the stock and the larger cable, everything that worked before the upgrade will still work. The bottom line, you at least need use the #4 wire kit when upgrading alternators.

PA Performance Limited Warranty - Click Here

California Residents:

WARNING: Cancer and Reproductive Harm-

Product Videos

Mustang Alternator Install - SVE 130 Amp (86-93 Fox Body)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Customer Photos (3)

Vehicle Applications

Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98)

About This Brand

PA Performance
The owners and partners of PA-Performance have been building, customizing and modifying their own vehicles for almost 20 years. Over these years, they have researched and designed high quality charging system parts for Mustangs ranging from alternators, starters, and starting system wiring harnesses. Choose from direct replacement stock or upgraded alternators to get your Mustang running good as new!

Look for Similar Items by Category

1979-1993 Mustang Parts » 1979-1993 Mustang Engine Parts » 1979-1993 Mustang Accessory Drive » 1979-1993 Mustang Alternators & Parts
Ford Mustang Parts » Mustang Engine & Underhood » Mustang Alternators & Parts » Mustang Alternator Parts

Products by Vehicle