5.0 Resto Fender & Quarter Panel Body Side Trim Nuts
These are the nuts and washers used to retain the fender and quarter panel moldings on your 1985-1993 Mustang LX, GT or Cobra. They are sold in sets of 4 nuts and 4 washers. 5.0 Resto quality makes these a must have! Please see the reference below to see how many your will need to complete your Mustang!
-Fender moldings require 3 nuts and 3 washers.
-Quarter panel moldings require 4 nuts and 4 washer.
This is another item I thought I could do without. Just use the old stuff. When over the years the plastic tabs they screw onto get old and brittle. They brake off and so goes the nut with them. Plus these have a slight bit of tar sealent on them. Your old nuts will nolonger have that since they have dried out over the years. Best just to get these. $9 seems a little high for 4 nuts. Keep in mind you need 4 for the front moldings and 3 for the rear each so that is a total of 14. They comes in packs of 4 so you will need 4 packs giving you 2 extra in the end. It would be nice if they offered packs of 3 as well to say you just a few bucks.
5.0 Resto - Dedicated To The Preservation Of The Fox Body Mustang
5.0 Resto specializes in restoration and specialty parts for 1979-1993 Ford Mustangs. Using years of experience in the late model Mustang restoration and aftermarket industry, 5.0 Resto is your source for anything Fox Mustang. While designing, and manufacturing several items such as 5-Lug Conversion Kits, weather stripping components and interior restoration items, 5.0 Resto also uses many other name brand suppliers to provide problem solving products directly to the Fox Body Mustang community. As with any part branded as 5.0 Resto, they stand behind all of these products to the fullest extent and have tested these products to ensure they live up to the quality and performance you have come to expect!