V6 Dual Catback Exhaust
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage on your 1998-04 V6 Mustang. Fabricated using the highest quality materials, our smooth, seam-coated, 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction enables them to resist corrosion and extends the life of the system.
Pypes systems come complete with a pair of precision matched Pypes STREET PRO mufflers, factory fit tailpipes, cad plated clamps and hangers. These systems can be installed at home without any special tools. Our easy to install, late model Mustang systems are designed to deliver that extra punch you’re looking for and will make sure that you get noticed.
- 16 gauge, mandrel-bent, stainless steel pipe
- Includes all hangers and plated hardware
- Slip-fit for ease of installation
- Installation instructions are included
- Includes turn down style stainless steel tips
- Includes Y-Pipe
- Shipping Specifications: 65 Lbs / 62” X 17” X 13”
The 3.8L 1994-04 Mustang V6 was an economical solution to those who liked the looks of the SN95 Mustang but couldn’t afford the more expensive GT & Cobra models. For many teenagers out there these Stangs were often their car. They provide a solid foundation with sporty looks and in the case of the 99-04 New Edge de... more
I bought this exhaust system after being assured by 2 different customer service reps that it was an exact fit. It was not. I had to cute 7 inches off the front pipe and twist and everything you can imagine to even get it installed. I had nothing but, trouble and being a certified mechanic I was shocked to see what a mess I got into. I eventually had to take it to an exhaust shop to have the front pipe heated and bent so get I off the floor boards and both mid hangers heated and bent to fit properly. I was promised this was not an exact fit system by the shop and that's why I had so much of a problem with trying to install it. In a previous review from another customer he stated he had to do some cutting as well and had problems with the hangers. I 100% dissatisfied with this purchase. An entire wasted day and then an additional $100.00 to have the system heated and bent properly to make it work correctly. Had I not cut the initial front y pipe I would of returned the entire system. Iam very disappointed with this experience. I should of reconsidered purchasing it after reading the other gentlemans review but, was assured by customer service I wouldn't have any problems. Thanks. Kirt
Was this review helpful to you?
Keith Ransom on
This exhaust did the job on my old 1999 mustang. The old one needed to be replaced so I decided to go with a duel exhaust. It went on relatively easy in my garage, had to take the rear tires off to get the tail pipes over the rear axle. Had a few small issues, I was short one clip for the tailpipe mounts, I sure it was in the box but when the box was delivered it was very wet and the end was blown out of the box a little. The hardware box was smashed and parts were loose outside of their bag. Also the muffler boxes were wet and pretty beat up, the mufflers had a couple of good dents in them. All went together pretty well, but if you are going from single stock to duel here's a tip for you. The clips that are supplied for the hanger on the passenger side only one of them will fit. The clips are too short to reach the hole closest to the frame, the other one is fine. So what I did is remove the clip from the drivers side where the supposed clip will work and swap it, now use can use the longer clip on the passenger side. You will have to cut about 8" off the Y pipe to get it to fit. I find the whole thing not too bad if you take your time. I would recommend this to a friend as it's a very nice system for the money and also sounds awesome.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Sounds great not real loud
robert m. on
I bought this for my wife's V6 Mustang, it sounds real good although it's definitely not a do-it-yourself kit. Almost every bend on this kit had to be rebent. All of the hangers had to be removed and rewelded. Luckily I have a lift, tubing benders and welding equipment.since I own a welding shop/ machine shop. I would not recommend this to someone who has to do it on Jacks in a driveway.
If you're working on a Latemodel Mustang, Pypes' innovative products, and superior quality allow you to make your exhaust purchase with absolute confidence that you are getting the best materials, best fit and best value available anywhere. Pype's aftermarket performance exhaust components give your Mustang more horsepower and torque while adding a great new exhaust tone. These x-pipes, h-pipes, headers, and cat back kits are direct fit and 100% bolt on, making installation quick and easy.