Pype Bomb Axle Back Exhaust
If you're looking to add some serious aggressive power and sound to your 2015-2017 GT, this Pype Bomb Axle-Back will get you there! Made from 304-grade stainless steel, polished to perfection, straight-pipe design, and lighter than factory, this kit will get you heard before you enter the line fo sight. This is one of the most aggressive axle backs out there on the aftermarket! This kit comes equipped with 4" polished stainless steel tips to tack on some additional exterior styling to your 2015-2017 5.0 S550.
This can be installed in approximately one hour with regular hand tools/garage tools. The factory mufflers must be removed with a saw and clamped with the supplied band clamps. This can be cut and welded if you would prefer to do so.
Great sounding aggressive exhaust and definately a bargain price
william m. on
Great sounding exhaust and it turns heads every time I rev it up. I feel like I'm driving a GT350 now. The stock 2015 exhaust is too quiet/mild for a GT. I understand Fords rationale considering it's being sold overseas also now and the noise decibal laws are pretty aggressive overseas.
Buyers beware --this will probably not pass any states noise ordinance laws- but hey your driving a Mustang GT ...it can't be quiet!
There is higher highway noise ....especially at 3-4000 rpms .......
At 2- 2.500 rpm (usually 75-80mph) the highway drone is not as bad. I blast my radio anyway so no biggy.
But don't expect low noise at highway speeds. It's kinda cool though blasting by people on the highway at 80mph sounding like a race car. I've even gotten a few flashes and thumbs up at highway speeds from other cars I'm passing.
Using a LMR discount code this exhaust can be had for close to $300 ....you won't find that price on eBay or anywhere.
Installation was EASY ....I did it in my driveway using race ramps that I backed up on. I used a grinder to cut 90% of the exhaust and a reciprocating saw to finish the job. I recommend the Lennox metal blades ...worth the money and made the job super easy. Find them on eBay. Have a metal file to file down the rough edges- that took literally 5 minutes. It only took 1 hour to cut and install. The right tailpipe I spent another 30 minutes adjusting and centering so it doesn't touch and burn the rear bumper exhaust cutouts. Follow the directions and cut just past the curve of the exhaust. It's especially important on the left side because you need all the extra pipe left for proper slack for the Pypes adjustments. This is exhaust is a lot easier to install also because the part you replace is at the very back of the vehicle as opposed to by the cats where you really have to crawl way under the car.
The Only gripe I had was the Pypes box (from Pypes probably) was kinda beat up and my clamps and directions were missing (probably slide out the gap in the box) . I'm sure LMR would have replaced the clamps if I had called. The directions are easily found online.
Thanks again for the exhaust LMR ... A real bargain!!!
Yes, I would recommend this item to a friend!
Was this review helpful to you?
!!! Love My Pypes Pype Bombs !!!
jake b. on
Pypes Pype Bomb Axle-back exhaust is a legacy purchase for me. I've had them on my 2006 Mustang GT, my 2011 Mustang GT and now on my 2016 Mustang GT. If you've had this exhaust before you'll be familiar with the highway drone with previous models but I've found it to be much less pronounced on the S550 vs previous model years. This is definitely one of the louder, "less refined", exhausts but I think that's how a Mustang should sound. Initial Startup is loud and a great way to start your morning. The 4" tips really stand out compared to the OEM exhaust tips. I like everything about this exhaust. I highly recommend a set.
I had them installed at the Ford dealership where I purchased my Mustang for $100 which I found to be extremely reasonable.
If you're working on a Latemodel Mustang, Pypes' innovative products, and superior quality allow you to make your exhaust purchase with absolute confidence that you are getting the best materials, best fit and best value available anywhere. Pype's aftermarket performance exhaust components give your Mustang more horsepower and torque while adding a great new exhaust tone. These x-pipes, h-pipes, headers, and cat back kits are direct fit and 100% bolt on, making installation quick and easy.
I now have a new 5.0 L 302CID 434 bhp GT. I have installed Flowmaster Mufflers, a K&N Air Filter and a full frontal Clear Bra. I had a 2012 V6 which was featured here on the LMR "Submit My Ride" pag...