LMR will be closed for the Memorial Day holiday - Monday, May 30th.
Improved Steering Response
Direct Bolt On Replacement
Larger Diameter Sway Bar
What's in the Box
(1) Rear Sway Bar
(1) Pair rear Sway Bar End-Links
Steeda Rear Heavyduty Swaybar with End Links
Steeda's rear swaybar for S197 05-14 Mustangs is a direct replacement larger diameter bar for the performance enthusiast. This bar provides a 50% increase in roll stiffness for improved handling, improved steering response, and reduced understeer for improved handling balance. A must have for the cornering enthusiast and perfect for street or track use.
Part number ST-5551056 includes Steeda's swaybar and outer mounting hardware. This swaybar uses the factory endlinks on GT HARDTOP models. Convertible models have different endlinks and are not compatible. Customer must purchase Hardtop endlinks separately from local Ford dealer or for the ultimate in control, use ST-5551052 which includes new billet machined aluminum swaybar endlinks with urethane bushings. ST-5551052 is compatible with all V8 models.
For V6 models without a rear swaybar, order part number ST-5551052 and part number 555-1061 hardware kit for a complete installation.
This swaybar's diameter is 7/8".
- Fits 2005-2014 Ford Mustangs
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Sway Bar Guide
Some of the most common questions asked when it comes to Stang suspension are the Mustang sway bar sizes. This chart gives you the stock Mustang sway bar sizes to assist you in buying the correct replacement bushings or deciding on an upgraded bar. This guide shows you Fox Body, SN-95, New Edge, S19... more
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
4.6L V8 Automatic transmission; Has Steeda cold air intake, bunch of appearance mods, sway bar kit, hood vents; I originally owned a Silver 2005 stock V6, but the original owner, Brittany Burns, passe...