Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Decreases Body Roll
More Balanced Suspension
Silver Powdercoated Finish
Heavy Duty Chrome Moly Steel
Made In The USA
What's in the Box
(1) Rear Sway Bar
All Needed Hardware
Steeda Rear Sway Bar - 7/8"
Steeda's popular 7/8" solid chrome moly alloy steel rear swaybar is now available as a single bar without endlinks allowing the street enthusiast or racer on a budget to reuse their factory endlinks!
Installation of Steeda's rear swaybar will improve steering response, reduce understeer and improve overall handling balance. This bar provides approximately 50% increase in rear roll stiffness.
Important Notes (Convertibles & V6): Owners of convertibles will need to use the swaybar kit with endlinks, part # 555-1052). Factory convertible endlinks will not support 555-1056.
V6 owners without a factory rear bar must use 555-1052 and 555-1061 V6 hardware kit (Listed Above).
- Fits 2005-2010 Ford Mustangs
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Sway Bar Guide
Some of the most common questions asked when it comes to Stang suspension are the Mustang sway bar sizes. This chart gives you the stock Mustang sway bar sizes to assist you in buying the correct replacement bushings or deciding on an upgraded bar. This guide shows you Fox Body, SN-95, New Edge, S19... more
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...