stock
Powered by Mustang Enthusiasts - Call Now (866) 507-3786

2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold by Steeda


Details   |  Reviews

Details   |   Reviews
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold
2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold

Easily install a cold air kit that works with your Cobra Jet manifold-equipped 2015-2022 Mustang GT thanks to this Steeda ProFlow S550 closed cold air intake.

Item #ST-5553223
MPN# 555-3223

Everyday Low Price: $399.95

Ships from Supplier!
Ships by Tuesday, July 05
 This item is returnable. Details

Free Shipping over $49

 Add to Cart

This product cannot be sold or shipped to the state of California. More Details

Made in the USA

 Benefits

  • Coolest Intake Air Temperatures On The Market
  • Largest Mass Air Meter On The Market
  • Quick & Easy Install
  • Made in the USA

 Features

  • CAD Designed Air Box Lid & Tube
  • Reusable Blue Air Filter
  • 122mm Mass Air Meter
  • Lifetime warranty

 What's in the Box

  • (1) ProFlow Cold Air Kit
  • (1) Steeda S550 Mustang Oiled Air Filter

2015-2022 Mustang 5.0 Steeda ProFlow Closed Cold Air Intake - CJ Manifold

Take your S550 to the next level of performance with Steeda's ProFlow closed cold air intake is a great choice for your Cobra Jet manifold-equipped 2015-2022 Mustangs 5.0! Steeda's ProFlow tune required S550 Cold air intake kit comes with a silicone adapter that will allow it to work with the Cobra Jet intake manifold. With the largest mass air meter offering on the market at 128mm, this Steeda ProFlow cold air kit will allow your Coyote to breathe much more freely than the stock intake. Featuring the provision for either a 120mm or 128mm mass air meter located in the tube with or without the supplied insert or you may opt to run the sensor in the elbow for up to 135mm of unrestricted flow. The system comes with an oiled reusable high panel filter. This kit is quick and easy to install and retains all factory vacuum lines while utilizing the factory grille duct. Covered by Steeda Lifetime warranty gives you peace of mind knowing that your new cold air intake will last the lifetime of your vehicle. Steeda's ProFlow Mustang cold air intake opens up the intake system of Ford's 5.0 engine, allowing it to breathe much more freely.
 

Tuning Information

  • An aftermarket tune is required! Please reach out to your tuner before purchasing this product to make sure they will have no issues when tuning for this Steeda ProFlow cold air kit.


Application

  • Fits 2015-2022 Mustangs 5.0 w/ Cobra Jet Intake Manifold

This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer


Steeda Warranty - Click Here

  • Ford Mustang - 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
  • Engines: 5.0
  • PCV routing may require some fabrication with included hardware and allows the use of a valve cover mounted breather.
  • Steeda's ProFlow cold air kit was specifically designed to fit the lower hood line of the 18+ Mustang GT but works with all 2015-2022 5.0L.

California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand


Steeda
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.

Products by Vehicle

Add to Cart