The LMR phone system will be down from 8:00am-9:00am CST for a Customer Service meeting on 1/19/2018. Thank you for your patience.
6061 T-6 Aluminum
3 Part Variable Rate Bushings
1/2 Weight Of Other Arms
What's in the Box
(2) Lower Control Arms
Put the power to the ground in your 1979-98 Mustang with Steeda's rear lower control arm kit! This is the 4500 series kit that is best for street use, road racing, and the occasional trip to the drag strip. These lightweight control arms are half the weight of other lower control arms out there, but constructed of high grade 6061-T6 aluminum for strength and durability. This material will not flex and reduces unsprung weight by 32%. This kit features a three part variable rate bushing to eliminate bind with minimal increase in NVH. This won't damage the torque boxes like solid bushings.
-Fits 1979-98 Mustang
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.