Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Bolt on Center Cap
Accepts Acorn Type Lug Nuts
No Polishing Wheels!
High Quality Chrome Plated Finish
Clears GT Front Brakes
Weighs 12.32 lbs
What's in the Box
(1) SVE Drag Wheel
(1) Center Cap
(5) Center Cap Attaching Screws
Diameter 15"Width 3.75"Lugs 5Offset -28 mm.Backspacing 1.2 in.Bolt Circle 4.5 in.
SVE Drag Wheels
Get extreme performance with the SVE Drag Wheel for your 94-10 Mustang! This 15x3.75 Chrome Drag Wheel is made for performance applications where weight reduction is valued. Hub centric and secured with Acorn Type lug nuts these wheels don't need special washers or shank lugs to fit your Mustang saving you time at the track! Strong, light weight and aggressive looking the SVE Drag Wheel will give you performance with looks to match. Pick up a set today to launch harder and get down the drag strip or track quicker!
Why Drag Wheels?
Switching to SVE drag wheels sheds weight and allows for track specific, performance tires to be mounted on your Mustang. The front SVE wheels, known as front runners, are skinnier than regular wheels to keep your front end as light as possible. The rear wheels are offered in 8" and 10" to mount wider tires, drag radials or slicks for more traction. This allows you to launch harder and improve your ET's at the track.
Have you converted your 1979-1993 Fox Mustang to 5-lug? These SVE Wheels will fit your five lug conversion! 15” Front Wheels fit:
Fox style rotor conversion
94-04 SN95 GT Front Brakes
The SVE drag wheels are not intended for street use, or for daily driving.
What does it take to add a set of 15x10 drag wheels to my Fox Mustang? This is a common question we get here at Late Model Restoration; so Jmac wanted to show you guys what it took to install a set of 15x10 SVE Drag Wheels on a Fox Body Mustang using 275/50/15 tires. The obvious first step was to do a 5 lug swap/conver... more
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-09-12 Watch as we install a set of 15x10 SVE Drag Wheels on this Fox Body Mustang. See what modifications are needed for clearance with 275/50/15 tires. The perfect set up for a weekend of drag racing in your Stang!!
For all the best in SVE Mustang parts for your Fox Body, New Edge, or SN95 Stang, make Late Model Restoration your source. Shop now for performance parts.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Upload your own picture of the Mustang SVE Drag Wheel 15X3.75 Chrome (94-10)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LMR.com ® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...