Will not fit 93 Cobra, SVO, and Saleen due to the increased track width of the rear axle.
Spline drive lug nuts are recommended due to the narrow lug cavity.
The included rivets are not removable.
Benefits
SVE Quality
Vintage Saleen Styling
Lifetime Structural Warranty
Road Race Inspired Styling Cues
Features
Deep Lip
Rich Gloss Black Finish
Simulated Chrome Rivets
One Piece Cast Aluminum Construction
What's in the Box
(1) 18x8.5 SVE Saleen SC Wheel
SVE Saleen SC Style Wheel - Gloss Black w/ Rivets - 18x8.5
Providing your Fox Body Mustang with retro Saleen styling has never been easier thanks to this gloss black 18x8.5" SVE Saleen SC style wheel! Featuring an iconic flat five-spoke design and simulated chrome rivets, this wheel is the perfect complement to the body lines of any 1979-1993 Mustang. Each spoke connects to a recessed center section that houses an SVE center cap and is finished in a rich gloss black color. Filling out the wheel wells in fashion, this SVE Saleen SC wheel will also increase traction, thanks to the increased 8.5" width compared to your thin original wheels.
SVE Quality
Meticulously crafted by SVE, this Saleen-inspired wheel will ensure a precise fit on your 4 lug Fox Body Mustang. Tailored with the optimal backspacing, offset, width, and diameter this 18" SVE Saleen SC wheel provides exceptional fitment and superior styling! Constructed using the low-pressure casting method, this durable aluminum wheel weighs in at 25 pounds and is designed to last for years to come. Finished in a deep gloss black, this SVE Saleen SC style wheel will be sure to impress with its riveting aesthetics. For the ultimate peace of mind, SVE backs this wheel with a 2-year finish warranty, and lifetime structural warranty.
Fox Spindle Wheels - Clearance Notes
1979-93 Mustang (All):
Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
It may require a front 8MM spacer to keep the grease cap from pushing out the center cap.
Rear quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car.
Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender clearance and exhaust modification for proper fitment.
1979-86 Mustang (All) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
1979-90 Mustang (All) - Due to smaller front wheel openings, installing wheels or tires wider than the factory may require additional clearance on front fenders.
1987-93 Mustang (2.3L) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
SVE Wheels® is a brand dedicated to producing premium-grade wheels that boost the aesthetics and performance of any 1979-present Mustang or Ford Lightning truck. Precision-engineered down to every millimeter, each SVE Wheel not only ensures the best fit and finish on the market, but provides performance with purpose. SVE Wheels® fuels the enthusiast lifestyle through in-depth research and development to create cutting-edge wheel solutions, built with the highest quality materials, giving you a sense of security on or off the road! As always, SVE Wheels are covered by a two-year finish warranty and a lifetime structural warranty, eliminating any guesses on which wheels are the perfect choice for your Mustang or Lightning project.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore, a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
Wheel Width
Wheel Backspacing
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Pattern
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
Wheel Offset
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Centerbore
The centerbore of the wheel is the opening in the middle of the wheel, surrounded by the lug holes. This opening helps to center the wheel to the hub. Its diameter is typically measured in millimeters (mm) and varies in size depending on vehicle application. Manufacturers approve up to a 1% variance in tolerance to pass wheels during inspection.
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
