SVE Mustang Engine Performance Kit
Want to add more horsepower and clean up the engine bay on your Foxbody? This 1989-1993 Mustang SVE engine performance kit is just what your need. This kit features an cold air intake, red SVE underdrive pulleys, an SVE throttle body, SVE EGR spacer, and a new serpentine belt. While adding power, it can also help improve gas mileage! Pick up this kit today to start modifying your 5.0L motor!
Cold Air Intake Kit
This Cold Air Intake kit completely replaces the stock factory air box and restrictive paper filter element in your 1989-1993 5.0 Mustang with a high flow filter assembly for a noticeable increase in horsepower and throttle response while filtering out destructive power robbing dust particles. This CAI pulls cooler, denser air from inside the inner fender well to make more power that you can feel.
SVE Underdrive Pulleys & Belt
The SVE underdrive pulley & belt kit for your 1987-1993 Ford Mustang 5.0L decreases accessory drive drag and increases power. With a few simple hand tools, you can easily swap out your stock pulleys with these lighter, resized pulleys for a noticeable difference in power! With a new serpentine belt included, you no longer have to worry about finding the right sized belt for your application! Underdrive pulleys are resized pulleys designed to drive a vehicle's accessories at a slower rate than factory. Each kit features a new crank, water pump, and alternator pulley to reduce the amount of power your accessories use, and free up horsepower that was once robbed by your accessory drive. Gains of up to 10+ hp and 2-3 mpg have been seen with the installation of a Fox Body underdrive pulley kit.
SVE 70mm Throttle Body
This 1986-1993 Mustang SVE throttle body is a great way to bring in more air for more power on your 5.0L motor. This throttle body has an opening of 70mm, a huge increase from the 55mm that came stock on these motors. This allows you to bring in as much air as possible to help maximize your performance. Pair it up with a cold air intake and a new intake manifold for serious horsepower gains!
SVE 70mm EGR Spacer
This is an SVE 70MM EGR spacer for your 1986-1993 Mustang 5.0L. This spacer is needed when replacing your throttle body to ensure proper flow through the throttle body to the intake manifold. It also has coolant line provisions that help in heating your air charge temperature. Includes the EGR gasket and spacer-to-intake gasket.
If running an aftermarket intake or intake spacer, please make sure there are no clearance issues w. the throttle body breather tube before closing hood. If clearance issue is noticed, the throttle body breather tube can be bent lightly to accommodate this.
- Fits 1989-1993 Mustang 5.0L
This kit is not C.A.R.B. legal in the state of California.
Fox Body Mustang Cold Air Intake Installation (89-93 5.0 SVE)
SVE Mustang Underdrive Pulley Kits (79-93)
Mustang Throttle Body Installation - SVE (86-93 5.0L Fox Body)
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-11-11 1989-93 FORD MUSTANG 5.0 SVE COLD AIR INTAKE KIT POLISHED - FOX BODY Brand: SVE Part Number # LRS-9659CA3K Fits: Ford Mustang 5.0L - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
Are you looking to increase horsepower and fuel economy on your Fox Body Mustang? How about doing all of this without breaking the bank? Well you are in luck! The SVE Cold Air Intake for the 89-93 5.0L Mustangs will do all of this and even improve the looks of your underhood with its polished finish. Installation is super easy with the help of this how to installation video!
Each SVE intake includes all the needed hardware and components you need to replace the restrictive factory intake tube and box with this high flow SVE CAI. Don't forget to look at our SVE Power Packages that include the SVE intake and under drive pulley kit, 70mm throttle body and many other SVE performance parts. They are guaranteed to wake up any 5.0L HO push rod motor!! See our complete line of SVE performance packages here: http://www.latemodelrestoration.com/products/Mustang-Performance-Parts-Kits-1979-1993Mustang Performance Part Kits
LatemodelRestoration.com, SVE & 5.0Resto are dedicated to the restoration and performance of your Project Foxbody Mustang!!
Published on 2013-10-22 SVE ALUMINUM UNDERDRIVE PULLEY KITS Part #s: Blue SVE-8221BL; Red SVE-8221R; Silver SVE-8221C, Black SVE-8221B Fits: Ford Mustang LX, GT, Cobra with 5.0L V8 Years: 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
Free up some horsepower in your 79-93 Fox Body Mustang with SVE Performance Aluminum Underdrive Pulley Kits. These direct bolt on underdrive pulleys fit all 79-93 Stangs with a V8. They are available in four colors, Blue, Clear/Silver, Red & Black, to help dress up your engine bay. They add extra horsepower by reducing your accessory drive drag and their lightweight billet aluminum construction. Installation can be done in your driveway with simple hand tools.
Each kit includes hardware, alternator pulley, water pump pulley & crank pulley.
Published on 2013-10-21 Upgrade your puny factory throttle body with a SVE 70mm throttle body kit that includes the TB, correct EGR spacer and all needed gaskets. Not only will it give you a boost in performance but it will also improve the under hood appearance with its polished finish. Watch the video as Jmac shows you how to install a new performance throttle body on your Fox Body Mustang.
Part Number# SVE-TB1501K Fits: Ford Mustang 5.0L GT LX Fits the following years: 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
SVE Throttle Body & EGR Spacer Kit This 1986-1993 Mustang SVE 70mm throttle body and spacer kit is perfect for adding horsepower and torque to your 5.0L motor. By increasing the size of your throttle body and EGR spacer, you get more air flowing into your motor which gives you increased performance! Pick up this kit today and get your Foxbody outrunning the competition.
SVE 70mm Throttle Body This 1986-1993 Mustang SVE throttle body is a great way to bring in more air for more power on your 5.0L motor. This throttle body has an opening of 70mm, a huge increase from the 55mm that came stock on these motors. This allows you to bring in as much air as possible to help maximize your performance. Pair it up with a cold air intake and a new intake manifold for serious horsepower gains!
SVE 70mm EGR Spacer This is an SVE 70MM EGR spacer for your 1986-1993 Mustang 5.0L. This spacer is needed when replacing your throttle body to ensure proper flow through the throttle body to the intake manifold. It also has coolant line provisions that help in heating your air charge temperature. Includes the EGR gasket and spacer-to-intake gasket.
got here fast every part was included looks amazing on car. 5*
Yes, I would recommend this item to a friend!
Was this review helpful to you?
david b. on
The pulleys are really nice. Throttle body was a nice add on. We took the air pump of so our belt was going to be way short than the one supplied. The diameter of the pipping of the cold air could be a little bigger. Where the pipe meets throttle body the pipe could actually be pushed too far into the rubber retaining ring, it could possibly cause issues with the opening and closing of the throttle body. It could also be the fact on me running a cobra intake. We trimmed about 1/2 inch of the pipe. Which brings me to my other issue with the cold air, it whistles. From a stop it's really noticeable. It's not a cool whistle either, more like a tea kettle whistle, but in this sets defense, I'm not running the stock intake either.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Jason S. on
I bought this a couple weeks ago and can't wait to put it all together and see the difference! With the weather breaking in northern Michigan the honey do list trumps the car projects for a bit! :)
For all the best in SVE Mustang parts for your Fox Body, New Edge, or SN95 Stang, make Late Model Restoration your source. Shop now for performance parts.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Well i picked this car up for only $500 bucks. Yep that's right $500. It has the DIS 2.3 with and automatic. It was really beat up cosmetically when I got her. The plan is to make it a v8 manual car s...