This Billet Vacuum Manifold by UPR was Designed for the 1986-1993 V8 Fox Body Mustang. This Vacuum Manifold will let you scrap the Black plastic factory unit that always breaks or cracks over time. It allows you to have additional ports for a Boost or Vacuum Port. Stainless Mounting screws and Fittings Included to replace the stock setup
Our Quality & Finish will leave you with a grin from ear to ear as it is the best looking unit available for your fox body Ford Mustang or Cobra.
No one else gives you bold clean styling like UPR Products! Installs in 15 minutes or less.
Bought this for purpose and dress up. I especially like how all is threaded so you can cap off or add a vacuum if desired. Beware: when you first receive it the fittings may feel tight enough, but trust they will leak. Definitely use Teflon tape and tighten good.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Function & FORM
Chris C. on
The plastic vacuum manifolds are known to crack and cause leaks. Replacing with this billet piece not only fixes that possible problem but it looks great!!
In 1989, Mark Mainiero and his son Joe started UPR Products with Mustangs in mind. With the help of their employees Jeremy Martorella and Bart Tobener, they brought in more racing victories and records than any other shop of that time. In 1998, Joe recognized the need for a company that fully understood the Mustang racer's suspension needs. While making customer service his main priority, he strived to offer the strongest, lightest, and highest quality parts at an affordable price. A firm believer in the “keep it simple” philosophy Joe made sure all his components could be easily installed and adjusted. Shop UPR for high quality Mustang performance and dress up components.
Ihave had a few Mustangs starting with the red one it is a factory took it through some restoration made it sterling grey with black stripes very fun cars to work with now have a 1991 5.0 factory 5 sp...