Huge Horsepower Gains
This 2007-2012 Shelby GT500 VMP high flow inlet elbow replaces your stock elbow for serious horsepower gains. Depending on your boost levels and throttle body setup, you can see gains of up to 20-40 horsepower. It fits TVS and stock superchargers and accepts up to a 72mm throttle body.
High Quality Design
VMP has designed this elbow to give you the most power with minimal work for an easy bolt on modification. This elbow has a high flow q-port shape that moves the most amount of air with the least amount of modification to the blower inlet.
The innovative Q-port design of our elbow will only require a small amount of material removal around the port. Opening up the tiny oval hole in the blower is essential to getting more air into the blower and making maximum power. Most people can do this at home if they take their time and use a dremel with a good bit or a carbide burr from harbor freight. A set of files will also work, though at a much slower rate. The VMP elbow can be used as the template for opening up the blower, and the larger opening shape marked off.
You must re-use your factory throttle body O-ring seal.
VMP tuning has been perfecting Ford tuning for over 10 years. Since 1999, they have grown to include many different pats and accessories for Mustangs. Their main focus is EFI tuning and they use the most up to date SCE software and equipment to get the most out of your motor. Having dyno tuned over 1000 vehicles, VMP tuning has perfected Mustang tuning. Choose from VMP tuning heat exchangers and superchargers to get your Mustang performing better than ever!
my 90 mustang is mostly stock, 64,000 original miles on the 302c.i. 5.0 motor. no rust, interior is all original and clean, no rips, upgraded the throttle body and cold air intake, 130amp alternator, ...