Wilwood DynaPro 4R Rear Drag Brake Kit
Wilwood rear drag kits are drag racing’s most popular rear brake kits. Wilwood designed this kit to provide the ultimate braking while being lighter than most brake kits out there. This brake kit mounts directly to your factory flange without modification. The dynamic mount rotors assure full release from the pads to run true and drag free down the track. The 12.9" rotors will clear most 17" or above wheel set ups.
Wilwood is known as one of the top quality brake manufacturers on the market. The quality shows in all of the parts they produce, including this kit. Wilwood includes a 2-piece, 12.9" brake rotor that provides increased brake cooling and surface area. These rotors are cross drilled and slotted to provide increased heat dissipation and better pad bite. The rotors weigh only 5.7lbs each! Black anodized, 4-piston calipers are included to provide even pressure and overall increased braking response. These calipers only weigh 4.1 pounds each!
Stainless Brake Hoses
This kit includes new Wilwood stainless brake hoses. The factory brakes hoses are rubber and prone to expansion under heat. The braided stainless hoses resist expansion during hard braking to increase brake response and provide a firmer pedal feel.
This kit is designed for drag use only and is not recommended for street use as it eliminates the rear parking brakes.
A minimum of 17" wheel is required.
Wilwood engineering has desinged and manufactures high performance disc brake systems since the late 1970s. Their extensive research has led to the ability to quickly manufacture brake components for nearly every application. Providing Mustang owners with big brake kits and performance brake components, Wilwood has set the industry standard when it comes to quality products. Their six piston calipers, drilled and slotted 2 piece rotors, and many other parts make up big brake kits designed to get your brake system performing at its best. Get your Wilwood Mustang parts at LatemodelRestoration.com!