- Restores Exterior Appearance
- Lifetime Structural Warranty
- Light Weight Construction
- Classic Saleen Styling
- Gloss Black w/ Machined Lip
- High-Quality Aluminum
- Five-Spoke Design
- Precision Machined
What's in the Box
- (4) 17x8 Black SC Style Wheels
Bolt Pattern 4x108 mm.
Offset +19 mm.
Backspacing 5.5 in.
SVE Black W/ Machined Saleen SC 17x8 Wheel Kit
Give your Fox Body Mustang sleek Saleen styling with this Saleen SC wheel kit from SVE! This wheel complements the Fox Body's straight body lines thanks to its signature flat 5-spoke shape. Each spoke flows to a recessed center section housing an SVE center cap. Surrounded by a machine-finished outer lip, this is the perfect contrast to the sleek, gloss black finish. This 17x8 Saleen SC wheel pack will fill out your wheel wells nicely while increasing traction over your thin factory wheels.
SVE carefully measured every millimeter of this wheel to ensure the best fit, and finish, for your Mustang. The Saleen SC wheel was designed to flow with the body lines of your Mustang. From the backspacing and offset, to the 8" width and 17" diameter, the Saleen SC wheel provides your Mustang with classic styling and exceptional performance! Constructed using 1-piece, cast aluminum; the Saleen SC wheel is built to last!
- Wheel Diameter - 17"
- Wheel Width - 8"
- Lugs - 4x108mm
- Offset - +19mm
- Backspacing - 5.5"
- Weight - 25lbs
- Fits 1979-1993 Mustangs W/ 4 Lug Setup (EXCL. Factory 4 Lug 1993 Cobras)
Fox Spindle Wheels - Clearance Notes
- 1979-93 Mustang (All) - Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
- 1979-86 Mustang (All) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
- 1979-90 Mustang (All) - Due to smaller front wheel openings, Installation of wheels or tires that are wider than the factory may require additional clearance on front fenders.
- 1987-93 Mustang (2.3L) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
- 1979-93 Mustang (All) - May require a front 8MM spacer to keep the grease cap from pushing out the center cap.
- 1979-93 Mustang (All) - Rear quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car.
- 1979-93 Mustang (All) - Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender rolling and exhaust modification for proper fitment.
5.0 Resto and SVE Wheel Limited Warranty - Click Here