1979-1993 Mustang SVE Saleen SC Style Wheel Kit - Gloss Black & Rivets - 18x8.5
by SVE Wheels ®
90 GT Eibach Sportline Springs (EIB-41035)
90 GT Eibach Sportline Springs (EIB-41035)
90 GT Eibach Sportline Springs (EIB-41035)
Transform the exterior aesthetics of your Fox Body Mustang in true 90's Saleen road racing fashion with this black, 18x8.5 SVE Saleen SC style wheel kit!
Will not fit 93 Cobra, SVO, and Saleen due to the increased track width of the rear axle.
Spline drive lug nuts are recommended due to the narrow lug cavity.
The included rivets are not removable.
Benefits
SVE Quality
Vintage Saleen Styling
Lifetime Structural Warranty
Road Race Inspired Styling Cues
Features
Deep Lip
Rich Gloss Black Finish
Simulated Chrome Rivets
One Piece Cast Aluminum Construction
What's in the Box
(4) 18x8.5 SVE Saleen SC Wheels
SVE Saleen SC Style Wheel Kit - Gloss Black & Rivets - 18x8.5 Revive the early '90s vibes on the exterior of your 1979-1993 Fox Body Mustang with this iconic 18x8.5" SVE Saleen SC style wheel kit! Utilizing simulated chrome rivets and a unique flat five-spoke design, this wheel kit is the perfect addition to complement the curves of any 1979-1993 Mustang. Featuring a deep outer lip and finished in a rich gloss black color, this wheel kit will be sure to display the road race styling of the Saleen SC Mustangs. Filling out the wheel wells with pure depth, this SVE Saleen SC wheel kit will help increase traction, thanks to the increased 8.5" width compared to your thin original wheels.
SVE Quality
Built on a modern 18" concept, this SVE Saleen SC wheel kit delivers fantastic fitment and vintage road racing styling thanks to the appropriate backspacing, offset, width, and diameter! Beautifully crafted by SVE, this kit will provide the riveting aesthetics your 4 lug Fox Body Mustang has been looking for. Weighing in at 25 pounds, these aluminum wheels are durable and built to last thanks to the tried-and-true low-pressure casting process. With a deep outer lip and a rich gloss black finish, this SVE Saleen SC style wheel kit will be sure to impress! SVE backs this kit with a 2-year cosmetic warranty and a lifetime structural warranty to give complete peace of mind.
Fox Spindle Wheels - Clearance Notes
1979-93 Mustang (All):
Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
It may require a front 8MM spacer to keep the grease cap from pushing out the center cap.
Rear quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car.
Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender clearance and exhaust modification for proper fitment.
1979-86 Mustang (All) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
1979-90 Mustang (All) - Due to smaller front wheel openings, installing wheels or tires wider than the factory may require additional clearance on front fenders.
1987-93 Mustang (2.3L) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
SVE Wheels® is a brand dedicated to producing premium-grade wheels that boost the aesthetics and performance of any 1979-present Mustang or Ford Lightning truck. Precision-engineered down to every millimeter, each SVE Wheel not only ensures the best fit and finish on the market, but provides performance with purpose. SVE Wheels® fuels the enthusiast lifestyle through in-depth research and development to create cutting-edge wheel solutions, built with the highest quality materials, giving you a sense of security on or off the road! As always, SVE Wheels are covered by a two-year finish warranty and a lifetime structural warranty, eliminating any guesses on which wheels are the perfect choice for your Mustang or Lightning project.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore, a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
Wheel Width
Wheel Backspacing
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Pattern
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
Wheel Offset
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Centerbore
The centerbore of the wheel is the opening in the middle of the wheel, surrounded by the lug holes. This opening helps to center the wheel to the hub. Its diameter is typically measured in millimeters (mm) and varies in size depending on vehicle application. Manufacturers approve up to a 1% variance in tolerance to pass wheels during inspection.
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
