Mustang Whiteline Lowering Springs
Improve the handling and stance of your S550 with this 2015-2018 Mustang Whiteline lowering spring kit! Your factory springs have your car sitting too high which results in body roll, large fender to wheel gap, and brake dive. Whiteline's lowering spring kit lowers your Mustang's center of gravity to alleviate these problems! By lowering the center of gravity, you'll experience improved handling in the corners, reduced brake dive, and a better vehicle stance; all while maintaining a good ride quality! This is achieved by utilizing a progressive rate spring on all four corners. Progressive rate springs keep a factory like ride quality that performs without being too stiff! Whiteline manufactures this spring kit with the highest quality materials down to the finest tolerances to optimize your driving experience! This kit will lower your S550 35mm/1.4" in the front and 30mm/1.2" in the rear.
Whiteline is an industry leader in performance suspension and handling. With lightweight components such as lower control arms, control arm relocation brackets, ball joints, bumpsteer kits, caster kits, control arm braces, and much more. These parts are made of Chromalloy for a lighter and stronger component for optimal performance. Not only do you get better handling, Whiteline has designed and tested their products to give your Mustang more traction and the best performance out of your suspension. Outfit your S197 with Whiteline's full line of suspension components to get your Mustang ready for track and race season!