Weld Pro-Star Wheels
Add some serious Race looks to your Mustang with these Weld Racing Rodlite wheels. These wheels are a direct fit application for your 1994-04 Ford Mustang. They feature a Polished finish and are 15x10" with a 6.5" backspacing.
Push-thru center cap & valve stem included
Maximum load rating for street applications is 1200 lbs per wheel (2400 lbs per axle) with a 28" tire.
Mag style lug nut required with a 1.310" to 1.375 shank length.
Made in Kansas City, USA
Weight: 25 lbs
Lug Pattern: 5 x 114.3
Does Not Fit
While we do not recommend these wheels be used in the following applications they can be made to work by grinding on the rear outer tie rod as well as the knuckle for clearance. Low profile IRS subframe bolts will be needed as well.
99-04 Cobra with IRS
79-04 Mustang with IRS Swap
Will not clear Cobra breaks at all.
A 1/4" spacer is required and grinding of the caliper bracket may be required.
These Weld Wheels will fit your five lug conversion!
On the following Fox applications, the outer fender lip will need to be rolled, the inner wheel well will need to be clearanced, the quad shocks will need to be removed, and the tailpipes may require adjustment.
79-93 using the fox style rear drum 5-lug conversion
79-93 using fox length axles and SN95 rear brakes
requires the hex head of the banjo bolt to be ground down slightly for clearance when using Cobra style rear brakes
- 94-04 GT/V6 with stock rear brakes
- 94-04 GT/V6 with Cobra style rear brakes*
- 94-98 Cobra*
- 2001 Bullitt*
- 03-04 Mach 1*
- 99-04 Cobra with solid axle conversion*
*requires the hex head of the banjo bolt to be ground down slightly for clearance
Weld Wheels Limited Warranty - Click Here
Rear Wheel Fitment Note
Installation of this wheel on the rear of your Mustang may require quad shock removal/flipping, fender rolling, exhaust modification, or a combination of all three.
This wheel does not have a protective clear coat finish. To prevent pitting or spotting you must polish and seal regularly.
When using longer than factory studs, an open end lug nut is required.
See what our customers have to say about this product!
Check out customer reviews.