1979-1993 Mustang Weld Draglites
Get the hot set up for your Fox Body with our Weld Draglite Mustang wheel and tire package with Drag Radials. This kit includes the wide 10" rear wheels to provide the best traction at the drag strip possible. This Mustang wheel and tire kit includes (16) Weld open end lug nuts, (2) 15x3.5" & (2) 15x10" 4 lug Weld Draglites along with (2) Cordovan Classic 165/80/15 & (2) Nitto NT555R Drag Radial 275/50/15 tires. Center caps included. Mounted, balanced, & ready to go.
Wheel Clearance Notes
-1979-93 Mustang All: Steering rack limiters may be needed to eliminate rubbing issues when turning.
-1979-86 Mustang All: Requires a wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
-1987-93 Mustang 4-cyl: Requires a wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
-May require an 8MM spacer to keep the grease cap from pushing out the center cap.
- 1979-93 Mustangs All: Quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car.
Free Mounting & Balancing
Each wheel and tire kit purchased from Late Model Restoration is mounted and balanced free of charge. This allows you to have a straight out of the box, direct bolt on kit. Add a set of lug nuts to your order for a complete upgrade!
While these tires are D.O.T. approved they are recommended to get you to and from the track and NOT for everyday use.
Nitto NT555 Drag Radial - 275/50/15
Speed Rating: V - 149 mph
UTQG Treadwear: 100
Overall diameter 25.71"
Overall width 11.1"
Cordovan Classic - 165/80/15
Overall Diameter 25.39"
Overall Width 6.5"
Speed Rating T-118 mph
Fits 1979-1993 Mustangs
Cordovan Tires Limited Warranty - Click Here
Weld Wheels Limited Warranty - Click Here
This wheel does not have a protective clear coat finish. To prevent pitting or spotting you must polish and seal regularly.
When using longer than factory studs, an open end lug nut is required.