Powered by Mustang Enthusiasts - Call Now (866) 507-3786
LMR Call Center is open Mon-Fri 8am-5pm CT. We are currently shipping orders at full capacity. Click Here for more updates.

On 3 Performance Warranty - LMR.com



Warranty Contact Info:
If you have a warranty concern or question, please contact us via phone at (254) 296-6500 or via email at productsupport@lmr.com.

On 3 Performance Warranty

Individual Component Warranty Information

  • Hot Side Piping, meaning exhaust from headers to turbo and turbo to cat back if included in the purchase, is covered for 1 year.
  • Cold Side Piping, meaning the piping running from the charge side of the turbocharger to the intercooler and from the intercooler to the throttle body, has a limited life-time warranty against manufacturer defects.
  • Turbocharger is covered by a ONE month (30 days) from date of purchase.
  • If an item is not mentioned in this section, there is no warranty implied.

    Disclaimer
    The following modifications or failure to follow the recommended guidelines below will warrant your warranty to be voided on specific or all components included in On3 kits.

  • Wrapping any manifold that On 3 Performance manufactures will violate your warranty. Cerakote or heat paint is fine and encouraged, but again do NOT wrap your manifolds.
  • The use teflon or any other thread sealer will void your warranty.
  • The use of anything other than the supplied fittings will void the warranty of your turbocharger.
  • The turbo must be clocked correctly for the turbo covered under warranty. This is overlooked and often times the #1 issue with turbo failure. If you are having issues with clocking your turbo, please contact On3 Performance directly. If you are not confident with being able to clock the turbo, or install it, or any part of the kit, please have it professionally installed.
  • Ensure your engine does not have crankcase pressure issues. This means making sure your PCV’s are vented to atmosphere with a breather. If a catch can is installed, make sure that it has an adequate sized breather to relieve any excess crankcase pressure. Unvented PCV’s and sealed catch can systems will cause issues and potentially blow the seals in your turbo(s).
  • Turbo systems must be installed with free-flowing straight through mufflers. Stock and chambered mufflers will void warranty of your turbocharger(s).

    For specific or more information about On3 Performance warranty and RGA information, please visit their warranty page.

    On3 Performance Warranty & Return Policies