Newest '79 93 mustang' Posts


Posts Tagged: 79 93 mustang
Results 1 - 25 of 319
  • Mustang AOD To T5 Swap/Conversion: Stage 5

    In this stage of your Mustang T-5 conversion, we install our much anticipated T-5 transmission as well as a new speedometer cable for the manual transmission. While removing all of your parts, make sure to keep up with what went where. Labeling, taking pictures, anything else you may ne... more

    Read more: 79 93 mustang , mustang , aod , aod to t5 swap

    Posted by Tyler Rodriquez on 2/16/2017

  • How To Install Mustang Rear Main Seal

    The hardest part of installing a new Mustang rear main seal is getting to the actual seal. This is a part you will want to replace if you already have your transmission out even if it is not leaking. This is cheap insurance to prevent future leaks. Tools Required: Small Flat Head Screwdriver Small Amount Of F... more

    Read more: 79 93 mustang , 94 04 mustang , mustang

    Posted by Tyler Rodriquez on 2/7/2017

  • Mustang AOD To T5 Swap/Conversion: Stage 4

    In this stage of your Mustang T-5 conversion, we replaced a few components that should be changed while you have your transmission out. While removing all of your parts, make sure to keep up with what went where. Labeling, taking pictures, anything else you may need to do can help save time and headaches during reas... more

    Read more: 79 93 mustang , mustang , aod , aod to t5 swap

    Posted by Tyler Rodriquez on 2/6/2017

  • Mustang AOD To T5 Swap/Conversion: Stage 3

    In this stage of your Mustang T-5 conversion, you will most likely need some help from a few friends to help remove the AOD transmission. While removing all of your parts, make sure to keep up with what went where. Labeling, taking pictures, anything else you may need to do can help save time and headaches during re... more

    Read more: mustang , aod , t5 , aod to t5 swap , 79 93 mustang

    Posted by Tyler Rodriquez on 1/26/2017

  • Jason Smith's 1993 Mustang Coupe

    Jason Smith has had an obsession for Mustang's since he bought his first one at the age of 15. Since then he has owned over 20 Fox Boy Mustangs (that's alot of broken ashtrays!). One of the most special cars to him was a 1993 Coupe that was modded just the way Jason had wanted. The car sat perfectly and handled great t... more

    Read more: 79 93 mustang

    Posted by Tyler Rodriquez on 1/26/2017

  • Mustang AOD To T5 Swap/Conversion

    One of the most common questions we get here at LMR is "How do I 5 speed swap my Fox Body?" Until now, there was no end all installation on this swap. We have put together a video series walking you through step by step on removing your AOD transmission and installing a T-5 transmission in a Fox Body Mustang. We’ll... more

    Read more: 79 93 mustang , mustang , aod , transmission

    Posted by Tyler Rodriquez on 1/25/2017

  • Mustang Parts Financing - Paypal Credit

    Whether you are dying for that new set of Wheels, needing to wrap up your build fast, or just can't wait to bolt on a supercharger, Late Model Restoration's Mustang parts financing is here to help. This buy now, pay later program from Paypal is a great way to get your Mustang fixed, customized, or just looking bett... more

    Read more: 79 93 mustang , 94 04 mustang , 05 09 mustang , 10 14 mustang , 2015 mustang , mustang , mustang parts financing , financing , paypal , bill me later

    Posted by Tyler Rodriquez on 1/19/2017

  • Mustang AOD To T5 Swap/Conversion: Stage 2

    In this stage of your Mustang T-5 conversion, you will need to source a manual brake pedal assembly. This is relatively easy and can be done with common tools. While removing all of your parts, make sure to keep up with what went where. Labeling, taking pictures, anything else you may need to do can help save time a... more

    Read more: mustang , aod , t5 , aod to t5 swap , 79 93 mustang

    Posted by Tyler Rodriquez on 1/18/2017

  • How To Read & Decode Your Mustang Vin Number

    Starting in 1954 up to 1981, vehicle manufactures used "VIN" numbers that did not have a standardized organization method for generating these numbers. Starting in late 1981 the National Highway Traffic Safety Administration standardized these numbers and changed the way we identify vehicles as we know it. This require... more

    Read more: 79 93 mustang , mustang , vin

    Posted by Jay Walling on 1/17/2017

  • How To Change Mustang Fuel Filter

    Tools you will need: Jack and Jack Stands Socket Set Safety Glasses Gloves Flathead Screwdriver Rags Drain Bucket Step 1: Pop the hood and disconnect the negative battery cable. Step 2: Locate the fuel schrader valve, remove the protective cap, & depress the valve so that it relieves pressur... more

    Read more: 79 93 mustang , 94 04 mustang , 05 09 mustang , 10 14 mustang , 2015 mustang , fuel system , lmr basics , how to

    Posted by Tyler Rodriquez on 1/13/2017

  • What Are GT40 Heads?

    What Are GT40/GT40P Heads? GT40 heads are a factory small block ford head found on a certain vehicles. They were most famous for their debut on the 1993 Cobra. GT40/GT40P heads were a more free flowing cylinder head that outperformed the factory E7 heads that were found on most 5.0 Fox Body Mustangs. To identi... more

    Read more: 79 93 mustang , 94 04 mustang , mustang

    Posted by Tyler Rodriquez on 1/12/2017

  • Mustang AOD To T5 Swap/Conversion: Stage 1

    To start off our Mustang T5 conversion, we first wanted to tear down the interior of our Fox Body and get it prepped for the big tasks ahead. This is relatively easy and can be done with common tools. While removing all of your parts, make sure to keep up with what went where. Labeling, taking pictures, anything els... more

    Read more: 79 93 mustang , mustang , aod to t5 swap , aod , t5

    Posted by Tyler Rodriquez on 1/11/2017

  • Aluminum Radiator Vs Stock Radiator Benefits, Features & Differences

    If your factory aluminum radiator has started to leak, is clogged, or has been damaged, it is the perfect time to upgrade to upgrade to an aluminum radiator. Some of the questions we always get are "What is the difference between an aluminum radiator and a factory radiator?" & "Why should I upgrade to an aluminum radia... more

    Read more: 79 93 mustang , 94 04 mustang , 05 09 mustang , 10 14 mustang , 2015 mustang , radiator

    Posted by Tyler Rodriquez on 1/9/2017

  • How To Change Mustang Spark Plugs

    Tools Required: Socket Wrench Spark Plug Socket Spark Plug Gapper Step 1: Disconnect The Negative Battery Cable. Step 2: Remove the factory air box if equipped for easier access to the spark plugs Step 3: Disconnect the spark plug wires, making sure to remember the correct order they we... more

    Read more: 79 93 mustang , 94 04 mustang , 05 09 mustang , 10 14 mustang , 2015 mustang , mustang , spark plugs

    Posted by Tyler Rodriquez on 1/4/2017

  • How To Install Mustang Fox Body Short Throw Shifter

    How To Install Fox Body Mustang Short Throw Shifter Step 1: Start the process by unscrewing your current shift knob. Step 2: Then you need to remove the shifter bezel, and boot assembly. Simply pull up on the bezel and the clips will pop the bezel out. Step 3: Remove the 4 bolts that hold in the existing... more

    Read more: 79 93 mustang , mustang , shifter

    Posted by Tyler Rodriquez on 12/30/2016

  • How To Install Fox Body Mustang Radiator

    How-To Install A Fox Body Mustang Aluminum Radiator (79-93 5.0L) An aluminum radiator is the perfect replacement radiator for your Fox Body Mustang! It is light weight, bolts right into the factory location, and is a quick and easy fix for a clogged, leaking, or damaged factory radiator. Required Tools ... more

    Read more: 79 93 mustang , mustang , sve , radiator

    Posted by Dustin Leathers on 12/30/2016

  • How To Install Mustang SVE Aluminum Electric Fan & Shroud Kit

    SVE Aluminum Electric Fan & Shroud Kit If you're looking to free up some extra horsepower, and drastically improve the cooling functions in your 1979-1993 Fox Body Mustang, then this SVE Aluminum Electric Fan & Shroud Kit is just what you need! This kit is intended for use with applications running an aftermarket... more

    Read more: 79 93 mustang , mustang , sve , radiator

    Posted by Dustin Leathers on 12/29/2016

  • How To Install Fox Body Mustang Hurst Shifter (87-93)

    Let's face it, the factory shifter in your Fox Body is good, but there is plenty of room for improvement. That's where the Hurst shifter comes into play. This sleek, easy to install kit gives your shifter a great new look while adding a better shifting angle. Follow along as we walk you through this quick and easy inst... more

    Read more: 79 93 mustang , mustang , hurst , shifter

    Posted by Dustin Leathers on 12/27/2016

  • How To Install Mustang Fox Body A/C Eliminator Bracket

    Installation Instructions *NOTE* Before installation of your Ford Racing Mustang A/C Eliminator Bracket, you will need to have the cooling system evacuated if it has any freon! Start installation by removing the serpentine belt. Remove the wiring harness, and the 2 hose fittings that are circled in the picture bel... more

    Read more: 79 93 mustang , mustang

    Posted by Dustin Leathers on 12/27/2016

  • How To Install Fox Body Mustang Hood Struts

    PRODUCT DESCRIPTION SVE Hood Struts If you're tired of the annoying factory hood prop rod getting in the way while you work on your engine, then it's time to replace it with our SVE hood struts! These high quality hood lift supports are installed easily in under 20 minutes thanks to the no drill design! The hood st... more

    Read more: 79 93 mustang , mustang , sve

    Posted by Tyler Rodriquez on 12/27/2016

  • How to Install Fox Body Mustang Convertible Quarter Window Motors

    Installation Procedure Step 1Pop out the rear seat bottom cushion. Step 2Remove the interior quarter trim panel. Step 3Remove the two window regulator plate bolts at the rear of the plate, and then lower the top. Step 4Remove the seat belt and support brace, along with the cross support. ... more

    Read more: 79 93 mustang , mustang

    Posted by Tyler Rodriquez on 12/27/2016

  • How To Install Fox Body Mustang Firewall To Hood Seal (79-93)

    Installation Instructions Start the installation process by popping your Mustang's hood To remove the original seal, just simply pull up on the seal, and the retaining clips will come free from the firewall Once the old seal is removed, take your new firewall to hood seal, and line it up with the same holes ... more

    Read more: 79 93 mustang , mustang

    Posted by Tyler Rodriquez on 12/26/2016

  • Mustang Inner Door Belt Weatherstrip Installation (1987-1993)

    Installation Instructions Step 1: the door panel by using a flat head screwdriver, or a pair of needle nose pliers Step 2: Remove the old weatherstrip from the door panel Step 3: Line up the tab on the new weatherstrip, with the notch on the door panel Step 4: Using a power drill w... more

    Read more: 79 93 mustang , mustang , weatherstriping

    Posted by Tyler Rodriquez on 12/22/2016

  • How to Install Mustang LX Grille Bar Eliminator

    Tools Required: -Plastic Cutting Saw -¼” Drill Bit -Masking Tape -Drill Motor -Eye Protection Installation Procedure: 1. Near the grille area, Apply a layer of masking tape to bumper cover to protect surrounding paint. 2. Remove the factory grille bar by cutting with a body saw or other equivalent cuttin... more

    Read more: 79 93 mustang , mustang

    Posted by Tyler Rodriquez on 12/22/2016

  • How To Install Fox Body Mustang Hurst Shifter (87-93)

    Let's face it, the factory shifter in your Fox Body is good, but there is plenty of room for improvement. That's where the Hurst shifter comes into play. Follow along as we walk you through this quick and easy installation. The dash pads in the 1979-86 Fox Body Mustangs have a tendency to fade and crack over the past ... more

    Read more: 79 93 mustang , mustang , shifter

    Posted by Tyler Rodriquez on 12/21/2016