Newest 'project car' Posts

Mustang Ram Dual Disc Clutch Installation (11-14 5.0L)

Well, we're finally back in business. My factory clutch started acting up just a few weeks ago.  The factory clutch starting releasing very close to the floor, making gear changes very difficult. I took the car in to my local Ford dealer, who proceeded to remove the clutch for inspection. The results were start... more

Read more: mustang , 10 14 mustang , s197 , ram , installation , project car

Posted by Jeff Jimenez on 12/2/2013

1995 Ford Mustang SVT Cobra R: Specs & Features

It has been graced by the likes of a mint condition 1979 Mustang Pace Car, the wide-body fox body mustang AKA the JBA Dominator, a 2000 Mustang Cobra R and even our 1995 Cobra R. These vehicles are all unique in their own way. Below I am going to highlight some of the key unique features that make the 95 “R” so unique.... more

Posted by Jeff Jimenez on 12/1/2013

Fox Body Fairmont 3V Motor Swap: Engine Installation

Part 2 of the 3v 4.6 Fox project is concentrating on getting the motor in the car.  As a group here at 50resto, this is our 4th effort at a 4.6 swap into a fox body, so we knew what we were getting into, for the most part.  The difference here is the 3-valve.  The exhaust bolt pattern is unique... more

Read more: mustang , 79 93 mustang , fox body , installation , ford racing , project car , 3v fairmont

Posted by Jeff Jimenez on 11/28/2013

Fox Body Fairmont 3V Motor Swap: Final Touches

In this part of our 4.6 Ford Racing Hot Rod 3-valve swap will complete loose ends that will button up the car and make it driveable.  As with any project, this seems to be the part that took me the longest.  Building a car is like building a house.  The framing of a new home seems to fly, leaving yo... more

Read more: mustang , 79 93 mustang , fox body , installation , ford racing , project car , 3v fairmont

Posted by Jeff Jimenez on 11/28/2013

Fox Body Fairmont 3V Motor Swap: FRPP Controls Pack & Fuel Install

If you've been following along, you know that the Ford Racing Hot Rod 3-valve 4.6 has found its place in our '79.  The k-member has been swapped, the Mustang long tube headers have been affixed to the engine via Logan Motorsports adaptors, the Quick time bellhousing has been installed with the Ram clutch, and the ... more

Read more: mustang , 79 93 mustang , fox body , installation , ford racing , project car , 3v fairmont

Posted by Jeff Jimenez on 11/28/2013

Fox Body Fairmont 3V Motor Swap: Test Drive

If you've been following along, you know that the 4.6 3v fox project is in running condition and ready for the testing, tuning and driving stages.  This brings us to our current blog with pics of the car and some video.  No reports from the drag strip yet, but they're soon to come, along with dyno number... more

Read more: mustang , 79 93 mustang , fox body , ford racing , project car , 3v fairmont

Posted by Jeff Jimenez on 11/28/2013

Fox Body Fairmont 3V Motor Swap (4.6L Mustang Engine)

We’ve said it before, the Fox Body Mustang has proven to become todays 32 Ford. You’ll find today’s hot-rodders installing virtually any engine combination you can imagine into these cars. I’ve seen everything from a Duramax to a Cadillac 500 in a Fox Body Mustang. The options are endless, thanks to the 1979-1993 Musta... more

Read more: mustang , 79 93 mustang , fox body , video , installation , ford racing , project car , 3v fairmont

Posted by Jeff Jimenez on 11/27/2013

Steeda Mustang Cold Air Intake Installation (2011-14 5.0L)

I recently had the opportunity to install a STEEDA cold air kit on my 2011 Mustang GT. The 2011 Mustang GT 5.0 STEEDA cold air kit is a very nice piece.STEEDA's kit is available for either the manual or automatic transmission 5.0. Its stainless steel and composite construction is of the highest quality. The kit incl... more

Read more: mustang , 10 14 mustang , s197 , installation , tech , steeda , project car , air fuel , intake

Posted by Jeff Jimenez on 11/27/2013

S197 Mustang Aluminum Driveshaft Review (2011-14 One Piece)

Weight is power. Simple automobile physics proves that removing weight is as beneficial as adding horsepower. The standard is something like 100 pounds is equal to a 10th in the quarter, or about 10 horsepower. That number is even higher when the weight being removed is from a moving part like a driveshaft or clutch, o... more

Read more: mustang , 10 14 mustang , s197 , video , product review , project car , driveline , driveshaft

Posted by Jeff Jimenez on 11/25/2013

Project Six Appeal: 2011 Mustang V6 Exterior Upgrades

By now I am sure most of you out there are up to speed with out 2011 Mustang V6 Project: Six Appeal and have seen the suspension, performance and wheel and tire transformation we have completed so far. If not, search our blog for more info. Well as the title states, it was time for a few exterior upgrades on the new 20... more

Read more: mustang , 10 14 mustang , s197 , project car , project six appeal

Posted by Jeff Jimenez on 11/23/2013

2011 Mustang Dyno: 3.7L V6 & 5.0L GT

If any of you follow our project cars, I am sure you have heard of our 2011 Mustang V6 dubbed "Project: Six Appeal" and our GM Scott Springer's 2011 Mustang 5.0L. We decided to take these two Stangs and see what they could do on the dyno. We never really got any baseline numbers for either Mustang, mostly because we go... more

Read more: mustang , 10 14 mustang , s197 , video , project car , project six appeal

Posted by Jeff Jimenez on 11/22/2013

Project Six Appeal: V6 Mustang Performance & Handling Upgrades

Our 2011 Mustang V6, AKA Project Six Appeal, got a major make over at the MCA Wild West Pony Show. Day one consisted of a complete tear down of the New 2011 Mustang V6 and then the installation of a Ford Racing Handling Pack, Ford Racing Brembo Front Brake Upgrade, Ford Racing Adjustable Rear Panhard Bar, SVE Heavy Dut... more

Read more: mustang , 10 14 mustang , s197 , video , project car , project six appeal

Posted by Jeff Jimenez on 11/19/2013

2013 Mustang Project High Impact Suspension Upgrades

If you’ve been watching our blog, you’ve been introduced to our new 2013 Deep Impact Blue Project Mustang GT. Our car came handsomely equipped with the premium package, and the new-for-2013 Track Apps, and Recaro seating. Our GT also sports the Track Package, featuring 19x9” wheels with Pirelli tires, Brembo fron... more

Read more: mustang , 10 14 mustang , s197 , project car , project high impact , suspension , ford racing

Posted by Jeff Jimenez on 11/18/2013

Mustang Project Cars By LMR.com

We have been graced by some amazing project Mustangs. Some are now long gone but definitely not forgotten. Whether they are still here or have been retired and sold off, there is one thing that is certain – no LMR.com Project Mustang has never been a trailer queen. They all see regular track time that includes road rac... more

Posted by Jeff Jimenez on 11/1/2013

Coyote Engine Swap Cobra On The Track

Project Coyote Swap (PCS) performed flawlessly on its first track outing! It made an appearance at a Track Guys event at the Texas World Speedway. Driver Scott Hubbard was amazed at the performance gains. Our coyote engine swap Mustang not only performed well; it blew away the competition! In this video you will see PC... more

Posted by Jeff Jimenez on 8/21/2013

J-Mac's DPS Coupe

1993 was the last year the Mustang was offered with the Special Service Package and the last year it was ordered by law enforcement agencies. I came across this one in December of 1999; I was on the hunt for a new ride after my 1988 GT met an untimely end. It belonged to Scott Springer, who is now our General Manag... more

Read more: mustang , 79 93 mustang , fox body , video , project car , texas dps coupe

Posted by Jonathan McDonald on 7/30/2013

Mustang Coyote Engine Swap Project

If you are flirting with the idea of a Coyote Engine Swap for your Fox Body or SN95 Mustang, you have come to the ultimate source of Coyote Swap parts and technical information! We have accumulated a mass of technical information and install videos to assist you with all your Coyote Swap needs. Whether you have questio... more

Posted by Jeff Jimenez on 7/30/2013

2013 Mustang GT: Project High Impact

As with all our project Mustangs, our 2013 Mustnag GT, AKA Project High Impact, has been a test mule for many 2013-14 Mustang parts we sell. This project got its name from the Ford color Deep Impact Blue. Project High Impact is a Premium model that is fully loaded with the Recaro seat option, Track Pack (Brembo brakes,... more

Read more: mustang , 10 14 mustang , s197 , video , project car , project high impact

Posted by Jeff Jimenez on 7/28/2013

Project High Impact On The Dyno

Watch Project High Impact, our supercharged 2013 Mustang GT, on the dyno at Central Texas Performance! With the help of the Ford Racing Whipple Supercharger kit, JLT 127mm Carbon Fiber Intake, Stainless Works Headers and a few other mods, Project High Impact put down an impressive 629 HP. This daily driven Stang prove... more

Read more: mustang , 10 14 mustang , s197 , video , project car , project high impact , dyno