Newest 's197' Posts

How To Reprogram Mustang TPMS

How To Reprogram Mustang TPMS Reprogramming the Tire Pressure Monitoring System or TPMS on your S197 Mustang isn’t nearly as complicated as you think it might be! Follow along in this video as we walk you through this simple process. This is critical when purchasing new wheel and tire kits for your 2007-current Musta... more

Read more: mustang , 05 09 mustang , 10 14 mustang , s197 , video , installation , tech , wheels

Posted by Tyler Rodriquez on 4/5/2017

Mustang Fuel Injectors: What Style Do You Have?

When upgrading your mustang and adding more power, one good thumb of rule is to upgrade the injectors for that application, especially when your car hits a certain horsepower range after modifications. When it comes to injectors, the bigger the injector might not always be the best for your modifications. Fuel injector... more

Read more: mustang , 79 93 mustang , 94 04 mustang , 05 09 mustang , 10 14 mustang , fox body , sn95 , s197 , engine , fuel system , air fuel , injectors

Posted by Jeff Jimenez on 9/9/2016

Mustang Bump Steer Correction Explained

When altering the suspension of your Mustang, bump steer is an issue that many enthusiasts run into. The geometrical inconsistency due to bump steer can cause your Mustang to handle in an incorrect manner. Definition of bump steer: Bump-steer is a change in toe angle caused by the suspension moving up or down. Bump-... more

Posted by Jeff Jimenez on 8/19/2016

2011-17 Mustang Ford Performance Oil Separator

How To Install Mustang Ford Performance Oil SEPARATOR Tools Needed: Flat Head screwdriver Installation Instructions Disconnect the PCV hose from the manifold to the valve cover. Pry off the electrical connection push pins from the valve cover and timing cover. Position the oil separator into... more

Posted on 3/14/2016

How To Remove & Install Mustang Front Bumper (05-09)

How To Remove & Install Mustang Front Bumper (05-09) Removing the front bumper on your 2005-09 Mustang is a critical step to access many components such as headlights, front end collision items, and ading a power adder options like a supercharger or turbo kit. If you are thinking about upgrading to a California Specia... more

Read more: mustang , 05 09 mustang , s197 mustang , video , installation , exterior , removal

Posted by Dustin Leathers on 12/21/2015

Mustang California Special Front Valance Installation (10-12 GT)

The California Special front valance kit simply replaces the standard GT piece.  No drilling, painting, or cussing required.  No painting means no additional preparation cost, or concerns with quality of materials and workmanship, or color inconsistencies.  I completed the installation of my Califor... more

Read more: mustang , 10 14 mustang , s197 , installation , tech , exterior , bumper , chin spoiler

Posted by Phillip Perez on 12/16/2015

S197 Mustang SVE Chin Spoiler Installation (05-09)

Chin spoilers are becoming one of the easiest, cheapest and best looking way to add some style to your 2005-09 Mustang. This SVE chin spoiler for your S197 is made of high grade urethane and molded in black so no painting is required! Our friend Michael stopped by in his black 2009 Mustang GT for our installatio... more

Read more: mustang , 05 09 mustang , s197 , installation , tech , sve , exterior , chin spoiler

Posted by Phillip Perez on 12/16/2015

How To: Install Mustang Steeda Adjustable Rear Control Arm (05-14)

Steeda Adjustable Rear Upper Control Arm With over 25 years under their belt, Steeda is still one of the #1 aftermarket Mustang parts manufacturers in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking the way it s... more

Posted by Landan Durham on 12/3/2015

How To: Install Mustang Center Console Arm Rest Pad (05-09)

Ford OE Center Console Arm Rest Pad It’s hard to believe the 2005 Mustang has been around for ten years now. And like any car, age slowly starts to become apparent the older they get. The center console is hands down one of the most used and abused pieces inside of the Mustang. For example, the one found in this car... more

Read more: mustang , 05 09 mustang , s197 , s197 mustang , ford , center console , arm rest pad

Posted by Landan Durham on 11/19/2015

How To: Install Mustang Blowfish Racing Shifter Support Bracket (11-14 MT82)

Blowfish Racing Shifter Support Bracket If you’re absolutely fed up with the negative effects of the MT-82 transmission such as missed shifts, grinding gears and high RPM lockout, then you should without question consider a Blowfish Racing shifter support bracket. This Blowfish Racing bracket is designed with sev... more

Posted by Landan Durham on 10/30/2015

How To: Install Kicker VSS SubStage Subwoofer Kit

Kicker VSS SubStage Subwoofer Kit In 1973, KICKER's Livin' Loud legacy began as a two-man operation, hand-building professional-speaker systems in a narrow one-car garage. From then on, KICKER has been delivering concert-like audio quality across a wide volume range with renowned bass and accurate sound. Kicker’s... more

Read more: mustang , 05 09 mustang , 10 14 mustang , s197 , s197 mustang , interior , kicker , subwoofer , substage , vss , trunk

Posted by Landan Durham on 9/9/2015

How To: Install AIRAID Cold Air Intake Kit (2011-2014 5.0L)

AIRAID Cold Air Intake Kit Airaid cold air intake systems are specifically designed to take full advantage of today's high performance Mustang technology, thereby increasing the coyote 5.0L engine efficiency and horsepower output. Their unique inlet and filter combination is substantially less restrictive when compa... more

Read more: mustang , 10 14 mustang , s197 , s197 mustang , airaid , air fuel , cold air intake

Posted by Landan Durham on 9/8/2015

How To: Install Ford Performance Rear Seat Delete & X-Brace (2005-2014)

Ford Performance Rear Seat Delete & X-Brace This rear seat delete was standard equipment on the 2012 and 2013 Boss 302 Laguna Seca racecar. It obviously deletes the rear seat, helps improve chassis rigidity and you even shave a couple of pounds. Which, when it does come to racing every last pound saved helps out tre... more

Posted by Landan Durham on 8/18/2015

How To: Install Mustang SVE Interior Door Panel Insert Kit

SVE Interior Door Panel Insert Kit If you own a 05-09 Mustang, more than likely your car has fallen victim to the ever-so-annoying interior door panel insert problem. Basically, the interior door panel insert material will start to come apart and sag down leaving your Mustang’s interior not looking up to par. Tha... more

Read more: mustang , 05 09 mustang , s197 , s197 mustang , sve , interior , door panel insert

Posted by Landan Durham on 7/8/2015

How To: Install Mustang GT Cam Phaser (05-10 4.6L)

Mustang GT Cam Phaser If you're experiencing engine issues in your 2005-2010 3 valve Mustang, then you may need to consider replacing your cam phasers. Common symptoms of a defective cam phaser is a rough idle, hesitation, ticking, or a light knocking noise when the engine is at operating temperature. One of our ... more

Read more: mustang , 05 09 mustang , s197 , s197 mustang , engine , valvetrain , camshaft , cam , phaser

Posted by Landan Durham on 5/12/2015

Mustang 5.0 Coyote Motor Torque Specs

When building your Coyote motor, having the right torque specs is key. Late Model Restoration's 5.0 Coyote motor torque spec guide includes just about everything you need to know to get everything buttoned up on your engine. Full Coyote Motor Instruction Manual Credits to: Ford Performance more

Posted by Tyler Rodriquez on 4/15/2015

Mustang Flywheel Tech Info (96-14 Mod Motors)

Mustang Modular Flywheel Guide The main difference everybody talks about on mod motor flywheels is whether it's six bolt, or an eight bolt. Basically, that's just referring to the number of bolts it takes to retain the flywheel to the crankshaft. To start off, the 1999 and 2000 Mustang GTs are a little confusing!... more

Posted by Landan Durham on 4/2/2015

Mustang Shorty vs Long Tube Headers

You're going to have a decision to make when it comes to selecting a new set of headers for your Mustang… shorty or long tubes. Well, I'm going to go ahead and put it out there before we get into the differences. Shorty Headers We all know that factory manifolds are restrictive and not the best for making power. ... more

Posted by Landan Durham on 3/31/2015

Mustang Clutch Tech & Review (96-14 Mod Motors)

Are you currently in the market for a new clutch setup for your 1996-2014 V8 Mustang GT, Cobra, GT500 or Boss? Late Model Restoration has you covered with our great selection of top name brand clutch assemblies. In this article we will cover the main differences and what to look for when trying to find the perfect... more

Posted by Jay Walling on 1/29/2015

2011-2014 Mustang GT SVE Off Road X-Pipe Install

2011-2014 Mustang GT SVE Off Road X-Pipe There is no denying that the Coyote motor puts down an impressive amount of power straight from the factory, but like everyone else, we wanted more! We also wanted to give our 2013 GT a meaner exhaust tone while picking up those extra horses. The solution, a 2011-2014 Mustang ... more

Read more: s197 , mustang , installation , exhaust , 10 14 mustang , sve

Posted by Tyler Rodriquez on 1/26/2015

2005-2010 S197 Mustang GT BBK Shorty Header Install

If you want to get some more power out of your 2005-2010 S197 Mustang GT then these BBK shorty headers will get you more power and more torque! They have 1 5/8 mandrel bent primaries and will bolt directly to your factory or aftermarket midpipe. They will include all of the needed gaskets and hardware and come in chrom... more

Read more: s197 mustang , mustang , 05 09 mustang , exhaust , headers

Posted by Trey Pridemore on 1/23/2015

SVE Mustang Hood Strut Installation

If you have never been able to enjoy a hood that essentially raises itself and you own a mustang, now is the time to do so! No one wants to deal with a clumsy prop rod! SVE Hood struts are one of the easiest, most budget friendly purchases that you can make to add a nice addition to your 2005-2014 Ford Mustang. Incl... more

Read more: mustang , 10 14 mustang , s197 mustang , installation , exterior , sve , hood

Posted by Jeff Jimenez on 12/19/2014

Ford Racing Cobra Jet Intake Manifold Installation

The Coyote is back! When Ford first released the Coyote engine in 2011, it sparked a wildfire in the hearts of Mustang owners everywhere. It was like 1985 all over again when Mustangs dominated the streets. Everyone wanted the legendary 5.0L under their hood. They say history always repeats itself and that ... more

Read more: mustang , 10 14 mustang , s197 mustang , installation , ford racing , intake , air fuel

Posted by Aaron Westerman on 11/25/2014

Mustang Eibach Camber Bolt Installation (05-14)

If you have lowered your 2005-2014 Ford Mustang, your biggest concern will be getting the front end properly aligned. There is nothing worst then having uneven tire wear from your camber being off after you lower your Mustang. With these Eibach camber bolts you will be able to adjust your front camber 1 degree of posit... more

Read more: mustang , 05 09 mustang , 10 14 mustang , s197 mustang , video , installation , suspension

Posted by Trey Pridemore on 11/11/2014

S197 Mustang Door Panel Removal (05-09)

Removing the door on your 2005-09 Mustang is critical to access many components such as weatherstripping, door handles, door locks and even stereo speakers. Removing the door panel is super simple and only requires a couple of common hand tools. Check out the needed tools below. Required Tools: 7mm socket with n... more

Read more: mustang , s197 mustang , 05 09 mustang , video , tech , interior , door

Posted by Jeff Jimenez on 9/30/2014