Newest 'sve' Posts

How To Install Mustang SVE EGR Valve Delete Kit (86-93)

How To Install Mustang SVE EGR Valve Elimination Kit (86-93) Tools Needed: 9/16", 1/2" & 9mm Sockets or Nut Drivers Needle Nose Pliers Wire Cutters Installation Instructions Being by removing the upper 9/16" nut and the lower 1/2" nut securing the EGR valve to the throttle body. Remove the two 10mm bolts ... more

Read more: mustang , sve , egr valve , fox body , fox body mustang , how to , install , installation

Posted by Ethan Buchanan on 8/18/2017

How To Install Mustang SVE Bump Steer Kit (94-04)

How To Install Mustang SVE Bump Steer Kit (94-04) If you plan on lowering or have already lowered your 94 to 04 SN95 Mustang, then you should consider this bump steer kit from industry leader SVE. This kit is designed to properly correct suspension geometry and eliminate bump steer on your lowered SN95 Mustang. Eve... more

Read more: 94 04 mustang , sve , how to , install , installation

Posted by Ethan Buchanan on 8/7/2017

How To Install Mustang GT SVE Catback Exhaust Kit (15-17)

How To Install Mustang GT SVE Catback Exhaust Kit (15-17) This catback exhaust from industry leader SVE has been specially designed for the 2015-2017 Mustang GT and features a T304 Stainless Steel Design. The Tubing is also mandrel bent for a precise fit, and features tubing measuring in at 2.5 inches in diameter. T... more

Read more: s550 mustang , catback , exhaust , sve exhaust , sve , 2015 mustang , 2016 mustang , 2017 mustang , how to , installation , install

Posted by Tyler Rodriquez on 7/28/2017

How To Install Mustang SVE Coilovers (94-04)

How To Install Mustang SVE Coilovers (94-04) Adding a set of coil overs to your 1994-2004 SN95 Mustang is a great way to get adjustable suspension for both performance and looks. Installation of a Mustang coil over kit can be intimidating, but we walk you through how easy the install can be! We do suggest having above... more

Read more: 94 04 mustang , coilover kit , sve , sve coilover kit , sn95 , sn95 mustang

Posted by Ethan Buchanan on 6/19/2017

2015 Mustang Steering Wheel Options (15-17)

Upgrading your S550's steering wheel is a quick and easy way to upgrade your interior. With Late Model Restoration's wide selection of 2015-2017 Mustang steering wheels, you get the choice of different steering wheels to match your interior. Follow along as we walk you through the differences of each steering wheel. ... more

Read more: 2015 mustang , mustang , steering wheel , sve

Posted by Tyler Rodriquez on 4/19/2017

How To Install Mustang SVE Coilovers (79-93)

How To Install Mustang SVE Coilovers (79-93) Adding a set of coil overs to your 1979-1993 Mustang is a great way to get adjustable suspension for both performance and looks. Installation of a Mustang coil over kit can be intimidating, but we walk you through how easy the install can be! We do suggest having above aver... more

Read more: 79 93 mustang , coilover kit , sve , sve coilover kit , fox body , fox body mustang

Posted by Tyler Rodriquez on 3/21/2017

How To Install Fox Body Mustang Aluminum Radiator (79-93)

How-To Install A Fox Body Mustang Aluminum Radiator (79-93 5.0L) An aluminum radiator is the perfect replacement radiator for your Fox Body Mustang! It is light weight, bolts right into the factory location, and is a quick and easy fix for a clogged, leaking, or damaged factory radiator. Required Tools Jack and ... more

Read more: 79 93 mustang , mustang , sve , radiator

Posted by Dustin Leathers on 12/30/2016

How To Install Mustang SVE Hood Strut Kit (15-16)

How To Install SVE Hood Strut Kit Tools Needed: 10mm & 13mm Socket Socket Wrench Installation Instructions Start by having the hood up and held up by the prop rod. Remove the fender bolt closest to the firewall with a 10mm socket. The bracket labeled "RH" is for the passenger side. Place... more

Read more: 2015 mustang , mustang , sve , hood struts

Posted by Tyler Rodriquez on 12/30/2016

How To Install Mustang SVE Aluminum Electric Fan & Shroud Kit (79-93)

How To Install SVE Aluminum Electric Fan & Shroud Kit If you're looking to free up some extra horsepower, and drastically improve the cooling functions in your 1979-1993 Fox Body Mustang, then this SVE Aluminum Electric Fan & Shroud Kit is just what you need! This kit is intended for use with applications running... more

Read more: 79 93 mustang , mustang , sve , radiator

Posted by Dustin Leathers on 12/29/2016

How To Install Fox Body Mustang Hood Struts (79-93)

How To Install Fox Body Mustang Hood Struts (73-93) SVE Hood Struts If you're tired of the annoying factory hood prop rod getting in the way while you work on your engine, then it's time to replace it with our SVE hood struts! These high quality hood lift supports are installed easily in under 20 minutes thanks to ... more

Read more: 79 93 mustang , mustang , sve

Posted by Tyler Rodriquez on 12/27/2016

How To Install Mustang Aluminum Radiator (05-09)

Adding a lightwieght aluminum radiator to your 2005-2009 Mustang is a great way to drop weight from your S197 and improve your cooling system efficiency. Installing an aluminum radiator in a 2005-2009 Mustang is a pretty easy step by step process. Follow along as customer Jeremy Howell walks you through his install! ... more

Read more: 05 09 mustang , mustang , sve

Posted by Tyler Rodriquez on 12/21/2016

How To Install 1979-2004 Ford Mustang Upper & Lower Rear Control Arms

How to Install 1979-2004 Ford Mustang Upper & Lower Rear Control Arms Tools Needed: Lift or Jack stands 15mm Wrench Socket set Extra Grease Flat-Head Screwdriver (Recommended)Brake Clean Installation Instructions Start by lifting your car up on a lift, or jack stands Remove your rear wheels Start ... more

Read more: 79 93 mustang , 94 04 mustang , sve , control arms

Posted by Tyler Rodriquez on 12/15/2016

How To Install Mustang SVE Billet Lower Control Arms

Installation Instructions Raise the vehicle up by supporting it on a lift, or stand so that the rear suspension is loaded. (Wheels in contact with surface) *Note* Do one side at a time Remove the stock rear control arms bolts. Next remove the rear brake cable that is routed through the arm itself Inspect the... more

Read more: 05 09 mustang , 10 14 mustang , mustang , control arms , sve

Posted by Dustin Leathers on 12/15/2016

How To Install Mustang SVE Full Length Subframe Connectors

Tools Required Standard hand tool assortment Disk grinder/Sander MIG welder 4 jack stands, or lift 3M or SEM weldable zinc primer spray paint/primer Installation Instructions (1983-93 CONVERTIBLE ONLY, ALL OTHERS SKIP TO STEP 12) Using a Sharpie, or other marking device mark the front, and rear edges of... more

Read more: 79 93 mustang , 94 04 mustang , mustang , sve

Posted by Tyler Rodriquez on 12/8/2016

How To Install SVE Halo LED Projector Headlights

Tools Needed: 1/4" Drive Ratchet 10mm Socket Needle Nose Pliers Wire Stripper Wire Crimper 4 Blue Quick Splice Wire Connectors 4 Blue Male Quick Wire Connectors 4 Blue Female Quick Wire Connectors 2 Red Wires (8 Inch) 2 Black Wires (8 Inch) Installation Instructions: Locate, and remove the 10mm nut ... more

Read more: 94 04 mustang , mustang , sve

Posted by Tyler Rodriquez on 12/7/2016

How To Install Mustang SVE Subframe Connectors (79-04)

How To Install Mustang SVE Subframe Connectors (79-04) Tools Required: Jack & Jack Stands 15mm & 17mm Sockets Wire Wheel, or Sandpaper MIG Welder Installation Instructions Raise the vehicle. We recommend a drive on lift. Jack stands or a two post lift is not recommended. Remove the seat track ha... more

Read more: 79 93 mustang , 94 04 mustang , mustang , sve

Posted by Tyler Rodriquez on 12/7/2016

How To Install Mustang Automatic Paddle Shifter Extensions (15-17)

How to Install Mustang Automatic Paddle Shifter Extensions (15-17) Follow along as we show you how easy it is to install your new paddle shifter extensions from Late Model Restoration! Tools Needed Hands Installation Instructions Start By Peeling the backing of one side of the provided 3M tape Ap... more

Read more: 2015 mustang , mustang , sve

Posted by Tyler Rodriquez on 12/1/2016

How To Replace A Fox Body Mustang Starter

Why do you need to upgrade the starter on your 1979-1991 Mustang 5.0L? Well, there are actually a few reasons. First off, the way the 1979-1991 starter is wired, the fender apron mounted starter solenoid (or starter relay) carries the full current load of the starter. This causes the solenoid in these year ranges to fa... more

Read more: mustang , 79 93 mustang , 94 04 mustang , fox body , sn95 , installation , sve , engine , starter

Posted by Dustin Leathers on 7/29/2016

How To Replace Fox Body Mustang Starter (79-95)

How To Install Fox Body SVE Mini High Torque Starter Tools Required: Floor Jack Two Jack stands 3/8 drive ratchet wrench 3/8 drive extensions 9/16 socket 1/ 2 socket 3/8 socket or wrench Installation Instructions Start by disconnecting your negative battery cable. Next, raise the car, and remove th... more

Read more: mustang , 79 93 mustang , 94 04 mustang , fox body , sn95 , video , installation , sve , engine , starter

Posted by Dustin Leathers on 7/29/2016

SVE FR500 Steering Wheel Details & Differences

When it comes to your Mustang's interior, the steering wheel is probably one of the most abused pieces in the car. 22 years of use surely has taken a toll on the appearance of your once very nice, and clean stock steering wheel. Fading? Smoothing of the leather? Pieces starting to chip away maybe? Have no fear! This ne... more

Read more: sve , sve fr500 , steering wheel , 94 04 mustang

Posted by Dustin Leathers on 6/10/2016

2005-10 GT/GT500 SVE Axleback Exhaust

Let's face it. Factory exhaust on the 2005-10 GT or GT500 is less than impressive. It's high time you fill those exhaust cutouts with something much more attractive, more powerful, and start turning more heads when you hit the street. The all new re-designed SVE Axleback Exhaust Kit for your 2005-10 Mustang GT or GT... more

Read more: gt , gt500 , sve , exhaust , axleback , mustang gt axleback , sve exhaust , 2005 , 2006 , 2007 , 2008 , 2009 , 2010

Posted by Jeff Oliver on 3/29/2016

1979-04 Mustang SVE Subframe Connectors

SVE Subframe Connectors Late Model Restoration is proud to offer an inexpensive set of subframe connectors for your 1979-2004 Mustang that are guaranteed to provide increased chassis stiffness and better handling! For correct installation, Subframe Connectors must be welded. The full length subframe con... more

Posted on 3/18/2016

S197 Mustang SVE Chin Spoiler Installation (05-09)

Chin spoilers are becoming one of the easiest, cheapest and best looking way to add some style to your 2005-09 Mustang. This SVE chin spoiler for your S197 is made of high grade urethane and molded in black so no painting is required! Our friend Michael stopped by in his black 2009 Mustang GT for our installatio... more

Read more: mustang , 05 09 mustang , s197 , installation , tech , sve , exterior , chin spoiler

Posted by Phillip Perez on 12/16/2015

How To Install SVE Caster Camber Plates (94-04 All)

How To Install SVE Caster Camber Plates (94-04 All) If you’ve lowered or have considered lowering your SN95 Mustang, then a set of SVE caster camber plates is an absolute must have! These caster camber plates offer maximum adjustments to get your suspension geometry properly corrected when lowering your car. SVE’... more

Read more: 94 04 mustang , mustang , suspension , sve , caster camber plates

Posted by Landan Durham on 12/2/2015

How To: Install Mustang SVE Hood Struts (99-04 All)

SVE Black Hood Strut Kit Let’s face it, just about all of us hate working around the prop rod when we open our hood. Luckily for you New Edge owners, the folks over at SVE developed a budget friendly hood strut to ditch that awful prop rod once-and-for-all. The SVE hood struts will be available in a black powder ... more

Read more: mustang , 94 04 mustang , hood struts , sve , hood , new edge mustang , sn95

Posted by Landan Durham on 10/28/2015