79-93 Mustang Emblem Kits

Replace all the emblems at once on your Fox Body Mustang with a kit put together by the experts at Late Model Restoration. All 1979-1993 Mustang Fox Bodies benefit from a fresh set of emblems and we made it easy for you to get everything in one step. From 1987 Fox Body Mustang LX coupe to the awesome 1993 Cobra, we've got you covered.

87-93 Mustang Emblem Kits


About the Video

1985-93 Mustang 5.0 Resto Exterior Emblem Kits - Install & Review

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2018-01-29
Replace all the emblems at once on your Fox Body Mustang with a kit put together by the restoration experts at Late Model Restoration. All 1979-1993 Mustang Fox Bodies benefit from a fresh set of emblems and we made it easy for you to get everything in one step. Exterior emblem kits are currently available for the 1985 -1993 Fox Body Mustangs.

Application: 1985-1993 Mustang GT, LX, & Cobra

Video Note:
- The steps illustrated in this video were demonstrated on a 1991 Mustang GT. Depending on the year and trim of your Fox Body, some steps may slightly differ.
Transcript
How’s it going everyone? Landan with LMR.com! In this video, I’ll be showing all of you a general understanding on how to remove your front bumper from a Fox Body Mustang.

Removing the front bumper from a Fox Body is needed for a few different reasons. Those include servicing the front bumper support, header panel, or really anything you can’t get to with the bumper attached to the car.

The removal process is going to be done on 1991 GT so these steps will be verbatim for you 1987 to 1993 GT owners. Now for you 1979 to 1986 guys and 87 to 93 LX owners; this process is dang near identical for you all as well.

To get started, support the front of the car.

Remove both rear wheels.

In this video, we will be removing the splash shields. While this is optional, it does make removing the fender to front bumper hardware a lot easier.

To do this, remove all of the Phillips head retaining screws.

There will be one at the front, top, and rear of the fender; as well as four underneath the car with.

For 87 to 93 GTs, removing the two retaining screws from the spat behind the tire will allow you to gently move the spat enough to remove the rear splash shield retaining screw.

Now, remove the four push pins from the splash shield.

There will be two on either side of strut, one near the rear of the k-member, and the other one is all the forward and underneath the frame rail.

With all of the attaching hardware now removed, separate the splash shield from the fender lip and roll the insides of the splash shield toward the strut.

Remove the splash shield from the car.

Go ahead and repeat these steps for the other side.

On the driver side, remove the 6 bumper cover to fender retaining nuts with an 11mm socket.

If you own an 87-93 GT, remove the two forward facing nuts from the reinforcement panel.

All others, remove the three forward facing nuts from the reinforcement panel.

Do the same for the passenger side.

While you’re still underneath the car, remove the 4 retaining bolts with a *

Inside of the engine bay and on the passenger side, remove the header panel to core support retaining nut.

This is 11mm as well and if your car has a factory air box, you’ll need to position that out of the way.

On the driver side, remove the battery from the tray for additional work room.

Once removed, loosen and remove the 11mm header panel to core support retaining nut.

Finally, remove the two 8mm retaining bolts securing the “L” brackets to the core support.

Bring the bumper forward and let it rest on the bumper support.

Disconnect all electrical connections.

Now you can completely remove the front bumper.

Reverse these steps to reinstall the bumper.

Alright guys, as far as the bumper removal process goes; it’s pretty straight forward. Again, splash shield removal is optional, but I promise it’ll make life easier for ya when removing the front bumper to fender retaining nuts.

To see more how-to and review videos covering industry leading products, be sure and subscribe to our YouTube channel, like this video, and turn on notifications. While you’re at it, checkout our other videos and shop LMR.com for all things 1979 to present Mustang and SVT Lightning.

79-93 Mustang Emblem Kits Tech Info

Get all your emblems replaced at once with an emblem kit from Late Model Restoration. A new set of emblems freshens up the exterior of your 79-93 Fox Body Mustang and gives you a sense of pride in ownership. Pick up a set today!