Mustang Mach 1 Cold Air Intake Guide

Mustang Mach 1 Cold Air Intake Guide

Mustang Mach 1 Cold Air Intake Guide

Posted 3/2/2015 by Aaron Westerman

Check out this guide to selecting Mustang Mach 1 Cold Air Intakes and supporting modifications!

FOLLOW: mustang , 94 04 mustang , new edge mustang , air fuel , intake

2003-04 Mach 1 Cold Air Intake Options

2003-04 Mach 1 JLT Cold Air Intake Kit (Fender Mount)

One of the most controversial, yet best decisions I made for performance increase on my Mach 1 was adding this Mach 1 JLT Cold Air Intake. Many are hesitant, as was I, to remove the functionality of the iconic Shaker Hood RAM Air System on my Mach 1. Once I got past the sentimental part of it, the power gain and throttle response quickly put my mind at ease.

Installation of this Cold Air Intake was simple for the most part. Being that it is a Fender-well CAI, it is fairly challenging to mount the fender tubing and filter; especially if you car has been lowered. I would highly recommend driving the car up onto some boards or a ramp and turn the wheel to the left for easier installation procedure.

With the addition of this JLT Cold Air Intake Kit, my Mach can breathe better and put down more power than before. Also installed with my JLT, I have an off-road x-pipe and some performance mufflers. Don't forget the tune that I put on there with it! I would recommend this CAI in particular over any others that are offered for the Mach!

2003-04 Mach 1 JLT Budget Cold Air Intake Kit

If you're looking for a great way to add power to your Mach 1 for a budget and time-friendly way, this JLT Budget Cold Air Intake Kit is for you! This JLT CAI will free-up some of that restricted airflow from the factory air filter and be able to put down more power than before. If you can't bear the thought of taking out your Shaker Hood RAM AIR System to insert a full-blown CAI, this is another good reason to get this kit. This is simply an upgrade to your Shaker set up.

Not only is this JLT Budget CAI powerful and budget friendly, it is also a "breeze" to install. Simply pull the detaching lever from the factory air-box to open up the filter area, and wiggle the Shaker piping free from the air-box. Put the Filter, Adapter Flange Shroud Ducting, and installation into place; you're good to go! This is a hassle-free assembly that should take absolutely no longer than 30 minutes -- tops.

2003-04 Mach 1 Throttle Body Options

If you're looking to get an improved throttle response, more air into your Mach 1 and more power out, look no further than an easy-to-install Throttle Body to compliment your Cold Air Intake, exhaust, and/or tune!

There are three primary Throttle Bodies that we carry that can be used for 2003-2004 Mach 1 4V applications. The AF-CTB99-01 from Accufab is a 60mm Dual Blade Polished Throttle Body. We offer 2 primary Throttle Bodies from BBK that can be used for your 2003-2004 Mach 1 application. The BBK-1705 is a Satin 62mm Throttle Body that also features a Twin Blade design. Finally, the BBK-1711 is the largest 4V TB that we offer at a 65mm opening that also features a satin finish and twin blade design.

Look no further than for all of your 2003-2004 Mach 1 needs!