With our SVE branded shift knobs, we have 5 and 6-speed offerings that come in both charcoal and black finishes for 1979-04 Mustangs. SVE also offers 03-04 Cobra-style shift knobs to add the popular Cobra touches to your Fox Body and SN95/New Edge Models. Also, LMR's wide variety of shift knobs could be a great compliment to your SVE Mongoose Billet or Econoshift Shifter! Whether you have a 5 speed or a 6 speed, we have the correct shift pattern for your transmission!
What Are Mustang Shift Knobs and What Do They Do?
Mustang shifter knobs are devices that can help tune the performance of your car. They provide a way for you to control the gears and speeds with much greater precision than just using your hand. If you're struggling to find a happy balance between engine and transmission, Mustang shifters will likely be able to offer some relief.
Mustang shifter knobs provide many benefits, including easier gear shifting and improved performance. Many people believe that they can actually make your vehicle faster by maximizing fuel efficiency and preventing waste. If you're looking for ways to improve the speed and handling of your vehicle, it might be time for a Mustang shift knob upgrade.
Just like there are many different types of Mustangs, there are also many different types of Mustang shift knobs. Each knob is designed to work with a different make and model, so you'll need to keep that in mind when you're shopping. There are universal knobs that should work with any car, but they might not be as effective as those that are specifically designed for your vehicle.
How to install a mustang shift knob
The Mustang shifter knob is easy to install, but there are some things you'll need to do it. You'll need a screwdriver and the shifter knob that you want to install, of course. If you're installing an aftermarket shifter knob, you may also need the original screws for your vehicle's console.
- First, remove the shifter cover by loosening the two screws on the top edge of the shifter cover. This is usually done with an Allen wrench or Torx T-50 bit. Put this somewhere where they won't get lost in case they're needed later during installation. The shifter cover should just pop off when you do this.
- Next, unscrew the two bolts that hold the shifter in place. These are usually located at the bottom of the shifter. Again, you'll need a screwdriver or Allen wrench for this. Be careful not to lose these screws, as they will be needed later.
- Now, take your new Mustang shift knob and insert it into the hole on the top of the shifter. If it doesn't fit, check to make sure that you did not lose any of the bolts or screws. At this point, screw in the two bolts that were removed from the old shifter knob and tighten them down enough for a snug fit with your new Mustang shift knob.
- Finally, reposition the shifter cover over the bottom of the shifter and reattach the two screws. Make sure they're tight, so they don't come loose while you're driving.
There you have it! You've just installed a new Mustang shift knob on your car. Give it a try and see how it feels. You may be surprised at the difference it makes in your driving experience.
Benefits of installing a mustang shift knob
- Improve the performance of your Mustang
- Easier gear shifting
- Prevent waste and maximize fuel efficiency
- Customizable to match your driving style
Why you should buy a mustang shift knob from LMR instead of somewhere else?
At LMR, we know Mustangs inside and out. We carry only the highest quality Mustang shift knobs made from the best materials. Not only will your shift knob look great, but it will also improve the performance of your Mustang. We also offer free shipping on all orders over $49, and our customer service is second to none. So why not buy your Mustang shift knob from LMR today?
