About the Video
Mustang nGauge Tech: How to Flash PCM & Upload a Tune (2007-2016)
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2016-03-21
Ok, you downloaded a custom tune to your nGauge. Now you want to upload the tune to your mustang. Watch this video to learn how.
Follow along in this video as we show you these easy steps to flash the PCM and upload your custom tune to your mustang. After uploading enjoy the new found Power and Torque of your Mustang!
Mustang Fitment: 2007 (07), 2008 (08), 2009 (09), 2010 (10), 2011 (11), 2012 (12), 2013 (13), 2014 (14), 2015 (15), 2016 (16)
Start by plugging the OBDII cable into the OBDII port.
Plug the other end of the cable into the nGauge.
At the device home screen, select the tuning option.
Arrow down until you find the “Load Stock” option.
Select “Load Stock”.
This will cover any of you that have already flashed the PCM.
If this is the first time flashing the PCM, this will not pertain to you.
Look over the info and hit the check mark.
Hit check mark again to confirm the stock file.
Turn the key to the on position, but do not start the vehicle.
Allow the nGauge to load the stock file.
Once completed, follow the on screen instructions.
To flash your new or revised Lund Racing tune; plug in the device and select the tuning option at the home screen.
Select “Load Tune”.
Arrow over to the current revision of your custom tune and hit the check mark on the selection you want.
Follow the on screen instructions and you’re all finished.