How To Install Mustang GT SVE Catback Exhaust Kit (15-17)
This catback exhaust from industry leader SVE has been specially designed for the 2015-2017 Mustang GT and features a T304 Stainless Steel Design. The Tubing is also mandrel bent for a precise fit, and features tubing measuring in at 2.5 inches in diameter. This kit also includes an H-Pipe to delete that sound hogging factory resonator. The mufflers in this kit are a race-inspired design that are very free flowing, resulting in a great sound for your 5.0L Mustang. The polished tips on the mufflers are a whopping 4.5 inches in diameter and feature a dual wall design. This SVE Catback Exhaust kit is a direct replacement for your factory catback exhaust and utilizes your factory hangers and will include four clamps for installation. To start off this installation, here are a couple of the main tools you will need:
Jack Stands or Lift
Socket Wrench w/ 13mm Socket
tool box with metric sockets
This installation is very simple, so lets get into it...
Start by supporting the car via a lift or jack stands.
Loosen the two exhaust sleeves and then remove all of the hanger hardware with a 13mm Socket.
Have a friend help you fully remove the factory catback from the car. Install SVE's intermediate pipes on the H-Pipe utilizing two of the provided clamps. Be sure to loosely tighten these clamps.
Transfer the two IRS cradle hangers to the intermediate pipes and the muffler hangers to the new mufflers. Also make sure the exhaust sleeves are installed on the factory cat pipes.
Install the catback into the cat and loosely tighten the clamps and hangers. Slide on each muffler and secure them in place with the provided clamps.
Position the muffler hangers into place and retighten the hardware. Make sure the tips are straight, and then re-tighten all hardware.
Double check everything, and then you're finished!
If you're curious how everything sounds after the install, go check out our video here! While you're there, go ahead and subscribe so you can see multiple install and review videos a week! If you'd like to check out how this sounds in person, click on the product link below to purchase this and follow our steps in this article or YouTube video!
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2017-07-24 Mustang SVE Catback Exhaust Kit. Elevate the driving experience in your S550 with this SVE 2015-2017 Mustang GT catback exhaust kit! Your factory exhaust is quiet, restrictive, and leaves much to be desired. SVE's catback completely replaces your factory catback to improve sound, power, and throttle response! This kit replaces the restrictive factory resonator with a high flow H-pipe that provides a deep growl to the sound of your exhaust, as well as increased power! Stainless intermediate pipes wrap around the IRS, and connect to a set of high flow, axle back mufflers. These mufflers produce a mild hum while cruising, and a menacing rumble at wide open throttle!
SVE Quality. SVE's industry leading quality shows in every bend, weld, and the finish of this high quality catback exhaust. Constructed using T304 stainless steel, this kit resists corrosion, oxidation, and other elements for performance that lasts. The 2.5" diameter tubing is mandrel bent for a precision fit, and smooth, uninterrupted, exhaust flow. Each high flow muffler has a dual wall, 4.5" polished tip that fills out your rear valance beautifully!
Application: 2015-2017 Mustang GT Coupe
Item # SVE-151934
Transcript How's it going everybody? Landan with Late Model Restoration. Today I'm going to be checking out SVE's cat back designed for the 2015 to 2017 Mustang GT.
This cat back exhaust kit from industry leader SVE is constructed from T304 stainless steel and mandrel bent for a precise fit. The tubing is two and half inches in diameter and will feature a high flow h-pipe which will delete that sound hogging resonator.
The mufflers are a round, race-inspired design that are very free flowing which will offer a great exhaust note from your five liter Mustang. The polished tips are whopping four and a half inches and are a dual wall design.
SVE's kit is a direct fit upgrade utilizing your factory exhaust hangers and will include four clamps for installation.
Installing this kit is very easy. Start off by supporting the car via a lift or jack stands. Loosen the two exhaust sleeves, and then remove all of the hanger hardware with a 13mm socket.
Have a friend help you remove the factory cat back from the car. Install SVE's intermediate pipes onto the h-pipe with two clamps. Loosely tighten the clamps.
Be sure and transfer the two IRS cradle hangers to the intermediate pipes and the muffler hangers need to be transferred to the new mufflers. Also make sure the exhaust sleeves are installed on the factory cat pipes.
Install the cat back into the car and loosely tighten the clamps and hangers. Slide on each muffler with the provided clamps.
Position the muffler hangers into place and retighten the hardware. Make sure the tips are straight and then retighten all hardware.
Double check everything and you’re all finished. Now, let’s check out some exhaust clips.
Overall install time here guys, bet on about two hours to get this one done. Common hand tools and a little assistant from a friend is all you should need.
To see more videos covering products from industry leader SVE, subscribe to our YouTube channel. This SVE cat back exhaust kit for the S550 GT is currently available right here at LMR.com!