Get it by Christmas! Order by December 16, 2016 @ 3pm CT

2015-17 Mustang Roush Pedal Kit Installation Instructions

The 15-17 Mustang pedals lack in the styling dept. Luckily Roush has you covered with there easy to install pedal kit. Follow along as we show you how to improve the looks and performance of your pedals with this 2015-2017 Mustang Roush pedal kit!

Accelerator Cover Installation


How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 1
Center the Roush accelerator pedal cover over the accelerator pedal and scribe the location of the four attaching holes.
Step 2
Using the 1/8" drill bit, drill a pilot hole in each of the four locations.
Step 3
Drill the attaching holes to the finished size using the 1/4" drill bit.
Step 4
Remove any burrs or sharp edges with a file or larger drill bit.
How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 5
Attach the Roush accelerator pedal cover using four (4) flat-head socket cap screws (black finish) and four (4) nylock nuts. Torque nuts to 4.5 Nm.

Brake and Clutch Cover Installation


How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 1
Remove the rubber pedal pads from the clutch and brake pedals.
How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 2
Center the Roush clutch pedal cover over the top of the metal pedal surface and scribe the location of the three attaching holes.
Step 3
Center punch the hole locations.
Step 4
Using the 1/8" drill bit, drill a pilot hole in each of the three locations.
Step 5
Repeat this procedure for the brake pedal.
Step 6
Drill the attaching holes to finished size using the 1/4" drill bit.
Step 7
Remove any burrs or sharp edges with a file or larger drill bit.
How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 8
Attach the Roush clutch and brake pedal covers using three (3) flat-head socket cap screws (one black finish, two bright finish) and three (3) nylock nuts for each cover. Torque the nuts to 4.5 Nm.

Dead Pedal Installation


How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 1
Carefully lift up on the factory dead pedal while detaching the three (3) press clips. This is what it will look like with the pedal removed.
How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 2
Insert the three (3) plastic retainers into the center of the three (3) slots.
How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 3
With the three (3) retainers installed, position the pedal in place. Using the three (3) screws, fasten the pedal. Torque fasteners to 4.5 Nm.
How To Install Mustang Roush Pedal Kit (15-16) - How To Install Mustang Roush Pedal Kit (15-16)
Step 4
After installation is complete, double-check that all nuts and screws are installed securely.