SHOP

Mustang Brembo Brake Kit Install (M-2300-S Ford Racing)

Add some serious stopping power to your 2005-14 S197 Mustang with the Ford Racing M-2300-S Brembo Brake Upgrade Kit. These big brake kits include 4 piston Brembo calipers, 14' rotors and all the needed hardware to finish off your installation!

Viewing this install and using the information shared is subject to the terms set forth here - View the LMR Install Instructions Disclaimer.
Mustang Brembo Brake Kit Install (M-2300-S Ford Racing) - Ford Racing M2300S Brembo Brake Kit Install

Need more stopping power out of your 2005-2013 Mustang? The stock brakes are pretty good for an as-delivered Mustang, but throw on some bolt on performance or forced induction on one of these cars, and your brakes become lacking mighty quick! The M-2300-S GT500 Style Brembo Brake Upgrade will have your eyeballs popping out of their sockets in no time!

Ford and Brembo teamed up to make this brake upgrade factory fit for the 2007-2012 Gt500 and now offer it as a kit for all 2005-2013 Mustang GT and V6 The end result is one that is very comprehensive and easy to install, while providing braking ability that’s untouchable for the price point. This direct bolt-on kit consists of 4 piston Brembo calipers, huge 14” brake rotors, beefed up Goodridge brake hoses, and all of the necessary dust shields, hardware and front and rear brake pads. All it requires is a few hours of your time, basic hand tools, and a buddy to help you bleed the brakes once installed.

These will require a minimum of an 18? wheel to clear, like our SVE Drifts, and come standard in a gloss black finish with white Brembo script on the face. As nice as these look, these are for Mustangs and in typical Mustang fashion, you’ve got to add your own custom touch to them. One of our long time customers Mike Clay, who is also the event coordinator for Mustang Week, recently added his custom touch to a set he received from us for his 2012 Boss 302. Shining bright behind our Silver SVE Drift wheels, he has custom painted his m-2300-s kit Gloss Race Red to match this gorgeous car. Check out the results, what a awesome Mustang!

If you put this brake kit on your Mustang, would you leave it be or would you paint the calipers? What color? Lets hear some ideas! Are the 14" 4 piston Brembo Brakes not enough stopping power??? Click the link below to see the new Ford Racing 2013 GT-500 15" six piston Brembo Brake Kit!!

2013 GT500 Brembo Brake Kit Installation

Mustang Brembo Brake Kit Install (M-2300-S Ford Racing) - Ford Racing M2300S Brembo Brake Kit Install Mustang Brembo Brake Kit Install (M-2300-S Ford Racing) - Ford Racing M2300S Brembo Brake Kit Install


Brembo Brake Kit For Sale!


About the Video

Ford Racing Mustang 14" Brembo Brake Kit Install - M-2300-S (05-14)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2014-03-24
The Ford Racing M-2300-S Brembo Brake Upgrade Kit includes everything you need to improve your stopping power and enhance your styling all in one package! You will get firmer brake pedal feel and drastically reduce stopping distances with the Brembo 4 piston calipers and 14" brake rotors.

This kit also includes new Goodridge Brake Hose Kit and rear performance brake pads. This is the perfect upgrade for any 05-14 Mustang V6 or GT that didn't come with a factory Brembo Brake Upgrade or Track Pack.

LatemodelRestoration.com 5.0Resto SVE
Transcript
The Ford Racing M-2300S and brake upgrade kit is intended for '05 to '14 Mustang GTs and V6s that don't have factory Brembos. The kit consists of black powder coated four piston Brembo calipers that were found on the '07 to '12 GT500, along with a new set of pads, 14 inch front rotors, new front brake dust shields, a new set of rear brake pads to match the front, and a set of four braided stainless brake lines. Now this kit will give you a much more sure footed feel in your braking performance both on the street and the track. And the installation, it's not too bad either.

Lift and support the rear of your Mustang and remove the rear wheels. Start with the passenger rear. Remove the brake caliper to bracket bolts. Slide the caliper off the pads. Remove the stock pads from the bracket and install the new Ford Racing pads. If needed, compress the caliper piston and reinstall the brake caliper. Using a tubing wrench, break loose the hard line from the hose. Remove the ABS sensor wire retaining clip and remove the brake hose bracket bolt. With a drain pan in place to catch the brake fluid, remove the banjo bolt from the caliber and hose.

Attach the new bracket to the supplied braided stainless hose with the supplied E-clip. Bolt the bracket into place. Using the supplied banjo bolt and copper washers, install the new braided stainless hose to the caliber. Transfer the hard line from the old hose to the new stainless hose. Reattach the ABS wire clip, and zip tie the ABS wire to the new brake hose. With the help of a friend, bleed the brake caliper until no air is present. Top off the brake master cylinder with the appropriate DOT 3 brake fluid.

Repeat all these steps for the driver's side rear. Reinstall the rear wheels and lower the rear of the car. Raise and support the front of your Mustang and remove the front wheels. You'll want to start with the passenger side of your car, butt for this video, we're going to illustrate all of the steps on the driver's side. Remove the caliper bracket to spindle bolts and remove the caliper assembly from the rotor. Remove the O2 rotor retaining clips and slide the rotor off the hub. Remove the dust shield retaining bolts and the dust shield. Slide your new dust shield in position and tighten it down to the spindle.

For the driver's side only, you'll need to remove the alternator splash shield to access the brake hose. Pop the ABS sensor wire lose. Remove the brake hose bracket bolt from the frame and from the strut. Slide your new 14 inch rotor and Brembo caliper assembly into place and install the caliber to the spindle with new bolts. Install the new brake hose to the supplied bracket with an E-clip and install the new hose to the strut with the old retaining bolt. Using the supplied banjo bolting copper washers, put the new braided hose on the Brembo caliber.

Transfer the brake hard line from the old brake hose to the new braided stainless hose. Install the brake hose bracket to frame bolt. For the driver's side only, you'll need to reinstall the alternator splash shield. You'll start by bleeding the passenger front outer bleeder are on the caliber first, then the inner bleeder. Then move to the driver's side and do the same. Top off your master cylinder with the appropriate DOT 3 brake fluid. Reinstall the front wheels and lower your Mustang.

At a minimum, you'll need to step up to an 18 inch wheel be clear these massive front brakes. However, if you like going to drag strip from time to time, our 17 inch SVE drag front runners will clear this brake kit with no problem. Because you're using factory installed components for a brake upgrade, there won't be any problem finding replacement pads and rotors later down the road. Plus, there's no shortage of upgrades available either. You can pick up a brake kit at your source for Ford Racing performance parts, LatemodelRestoration.com
Ford Mustang - 2005 (05) - 2006 (06) - 2007 (07) - 2008 (08) - 2009 (09) - 2010 (10) - 2011 (11) - 2012 (12) - 2013 (13) - 2014 (14)