Mustang Park Light Installation (2005-2009)

Created by Tyler Rodriquez
Date Created: 2/17/2015
Last Updated: 12/22/2023

Replace your cracked, broken, or faded 2005-2009 Mustang park lights using this easy step-by-step installation guide.

Viewing this install and using the information shared is subject to the terms set forth here - View the LMR Install Instructions Disclaimer.

2005-2009 Mustang Park Light Installation Instructions

Read along as Late Model Restoration walks you through a step by step install of the direct replacement park lights on the 2005-2009 Mustang.

Required Tools:

  • Flat-Head Screwdriver
  • Phillips-Head Screwdriver
  • 10mm Socket
  • 3/4" Socket
  • Pliers

Installation Instructions:

  1. Remove the 6 plastic push pins from the radiator cover.
  2. Remove the radiator cover and set aside.
  3. Remove the 2 10mm bolts holding the bumper pillar in place.
  4. Pull the pillar up and to the front of the car to release the tabs.
  5. Remove the three Phillips-head screws that hold the splash shield to the bumper.
  6. Remove the push pin holding the splash shield in place and pull the splash shield back.
  7. Remove the two bolts holding the bumper to the bumper bracket.
  8. Do the same for the other side.
  9. Pull down on the bumper to release it from the bracket.
  10. Once free, move the bumper forward and release the fog light and park light connections.
  11. Remove the bumper and set aside.
  12. Carefully squeeze the two retainers holding the park light in place and remove the park light.
  13. Twist the bulb retainers counter clockwise to release them from the housing.
  14. Remove the bulbs and replace with the new bulbs in the kit.
  15. Reinstall your bulb retainers into your new park lights.
  16. Slide your new park light into the front notch in the bumper and snap the park light onto the retainers.
  17. Reinstall your bumper making sure to connect your harnesses to the bulb assemblies.

Stay tuned-in to for all of your 2005-2009 Mustang parts and videos!

Sort By

2005-09 Mustang Park Lights

About the Video

Mustang Front Bumper Park Lights Install (2005-2009)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2014-10-03
Are you looking to update or change the Park Lights on your Mustang? We have the park lights for you, our modern and sleek looking park lights feature a black housing with clear lenses and chrome reflector. These lights will add some serious styling to your Mustang and are easy to bolt on.

Our Mustang Front Bumper Park Lights comes with the driver's side and passenger side park lights, a set of new bulbs, and detailed instructions. This installation should take you 35-45 minutes with common hand tools, and can be done in your drive way.
Hey guys, Landan here with If you're wanting to add more styling to the front end of your '05 to '09 Mustang, look no further than our black housing park lights.

These park lights will add that sinister appearance, , all while being easy to install. They'll feature clear lenses, a snap-in design, include detailed instructions, and new bulbs. Now let's go ahead on this '07 Mustang. We're going to show you just how simple this install is.

With your hood open, start by removing the six plastic push pins from the radiator cover. Slide a flat head screwdriver underneath the recessed edge and lift up. If that doesn't work, carefully remove the push pin with needle-nosed pliers. Once removed, lift up the radiator cover and set it aside.

Next, remove the 2 10-millimeter bolts that hold the bumper pillar in place. Pull the pillar up and towards the front of the car to release the top of the bumper.

Next, remove the three Phillips head screws and attach the splash shield to the bumper. Remove the push pin from the splash shield. Carefully pull the splash shield back and remove the two bolts that hold the bumper to the bumper bracket. Do the same for the other side. Then pull down on the bumper to free it from the bracket.

Once free, carefully move the bumper back to remove the park light and fog light connections. Remove the bumper and set it aside. With the bumper removed, locate the two plastic retainers that hold the park light in place. Carefully squeeze the two plastic retainers to release the park light from the bumper. Pull the park light away from the bumper and out to release the front tab.

Rotate both the blinker and park light bulb counterclockwise to release them from the park light housing. Remove both bulbs from the light socket. Replace both with the supplied amber bulbs.

Reinstall both the blinker and park light socket into your new park light assembly. Slide the front tab into the notch on the front bumper and then snap the park light onto the two retainers. Repeat these steps for the other side.

When reinstalling the bumper, be sure to reconnect all of your lights, tighten down the bumper to the bracket, position the splash shield back into place, push your plastic push pin through the splash shield, and tighten the three Phillips head screws.

Push the bumper pillar over the tab, and tighten the two bolts. Then reinstall your radiator cover and six plastic push pins.

With about 30 to 45 minutes of time, you can install these black housing park lights in the comfort of your own garage. For more Mustang how-tos, be sure to subscribe to our YouTube channel. And for the latest and greatest appearance mods, head over to
Thumbnail image of the author of this article, Tyler Rodriquez.

About the Author

Tyler has written content for Late Model Restoration for nearly 8 years, producing over 300 articles. As an avid New Edge fan, Tyler has owned 4 2004 Mustangs and an 88 Convertible Fox Body. Read more...