LMR Will Call pickup service & shipping times may vary during Holiday season. Click here for more info.

How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)

Posted 10/30/2019 by Cristian Coronado

Check out our article explaining step-by-step instructions on how to install our new EcoBoost Mustang Ford Performance Throttle Body on your 2015-17 Mustang.

FOLLOW: 2015 mustang , s550 mustang , ecoboost , ford performance , throttle body , installation

How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)

  1. To begin the install, open the hood and loosen the hose clamp on the intake pipe with a 7mm socket.
  2. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  3. Loosen and remove the (4) 8mm throttle body to intake manifold retaining bolts. Keep leverage on the throttle when removing the last bolt.
  4. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  5. Rotate the throttle body to expose the electrical connection, slide back the red locking tab then depress the connector and disconnect it from the throttle body.
  6. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  7. Before installing the new throttle body, verify the gasket is still in place and is not damaged.
  8. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  9. Connect the electrical connection and slide the red locking tab inward to secure it into place.
  10. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  11. Position the throttle body into place and install the (4) retaining bolts by hand.
  12. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  13. Snug the bolts down and then you will want to torque them to 89 inch-pounds working in a criss-cross pattern.
  14. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)



  15. Reinstall the inlet pipe and tighten the clamp.
  16. How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17) - How To Install EcoBoost Mustang Ford Performance Throttle Body (15-17)




Mustang Ford Performance Throttle Body

  • $599.99
    Ford Performance Logo

About the Video

2015-2017 EcoBoost Mustang Ford Performance Throttle Body - Install & Review

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2018-08-14
Mustang Ecoboost Throttle Body
Quickly, and easily, bolt-on improved horsepower, torque, and throttle response with this Ford Performance 2015-2017 Mustang Ecoboost throttle body! Along with the performance improvement, this throttle body will also dress up your engine bay. As soon as you open the box, the sleek shine will make you think twice about installing it! The billet aluminum body has a polished finish, with embossed Ford logo, that is sure to stand out. A blue anodized throttle blade, with Ford Performance logo, makes this throttle body a work of art!

Ford Performance Quality
Ford Performance designed, and manufactured, this throttle body in the USA for quality, and performance, that lasts. The 70mm diameter provides a significant increase over your stock 60mm throttle body. This larger diameter increases airflow to your engine bay for improved power. Ford Performance engineers designed this throttle body to be fully compatible with your stock air intake system, which means no tune is required! This throttle body is a 100% bolt-on installation! All of the factory electronics are pre-installed for a plug and play connection. Four, stainless steel, mounting bolts are included so your transformation is complete in a matter of minutes.

Application: 2015-2017 Mustang Ecoboost w/ 2.3L

Item # M9926M2370
MPN # M-9926-M2370
Transcript
What’s up guys? Landan here with lmr.com! Today I’m going to providing my quick overview of this EcoBoost throttle body from Ford Performance as well as showing you guys the very simple installation process.

This throttle body from Ford Performance is going to appeal to the EcoBoost enthusiast out there looking for a nice upgrade over the factory equipment.

Out of the box this thing looks entirely too good to install onto the car… so obviously the quality and finish is second to none!

It’s constructed from billet aluminum and then polished to a high shine.

Other than the nice polished finish, the throttle valve is anodized blue which also incorporates properly placed Ford Performance logos.

Now the factory throttle body diameter measures in at 60mm whereas this throttle body from Ford Performance has a diameter of 70mm.

The increase in diameter is going to allow for more airflow into the intake manifold resulting in more horsepower and torque from your EcoBoost.

One of the best benefits from this particular throttle body is that no custom tune is required for it work with your 2015 to 2017 EcoBoost Mustang.

In the box will be one throttle body and four attaching bolts.

To begin the install, open the hood.

Loosen the hose clamp on the intake pipe with a 7mm socket.

Position it out of your way.

Loosen and remove the four 8mm throttle body to intake manifold retaining bolts.

Keep leverage on the throttle body whenever you remove the last bolt.

Rotate the throttle body to expose the electrical connection.

Slide back the red locking tab.

Depress the connector and disconnect it from the throttle body.

The stock throttle body is now free to come out.

Before installing the new throttle body… ensure the gasket is in place and not damaged.

Position the new throttle body into place.

Connect the electrical connection and slide the red locking tab inward to secure it in place.

Ensure the throttle body is orientated correctly and then install all of the bolts by hand.

Snug them down and torque each bolt to eighty-nine inch-pounds in a criss-cross pattern.

Reinstall the inlet hose and tighten the hose clamp.

Start the car and check for operation.

After that, you’re all finished!

Alright guys, this install is an absolute piece of cake!

This is great all around modification for any EcoBoost enthusiast.

Whether your car is still stock or you’re adding this throttle body to support other modifications, this 70mm throttle body from Ford Performance is a must have!

To see more how-to and review videos covering industry leading products, be sure and subscribe to our YouTube channel, like this video, and turn on notifications. While you’re at it, checkout our other videos and shop LMR.com for all things 1979 to present Mustang and SVT Lightning!