How To Remove, Clean, & Install Fox Body 10-Hole Wheel Center Caps

• 10-Hole Center Caps 
• 10-Hole Wheels

Tools and Materials:

• Inexpensive pry tool or panel removal tool (non-metal)
• Non-abrasive cleaner wax (e.g., Meguiar's)
• Microfiber towels
• Center caps to clean
• Patience and attention to detail
  
  

Step 1: Removing the Center Cap:

• Locate the notch on the wheel where the center cap is seated.
• Insert the plastic pry tool's hook end into the notch, gently lifting the cap.
• Rotate the tool outward while keeping your thumb and hand on the cap to prevent it from flying off.
• Slowly release the cap, treating it as if you're pushing it back into place.
• The cap may be snug, so work around the perimeter if necessary until it's removed.

Step 2: Cleaning the Center Cap:

• Use a non-abrasive cleaner wax to clean the center cap.
• Apply a small amount of cleaner wax to a microfiber towel.
• Roll the towel tightly and spread the product on the cap's surface.
• Gently rub the towel in back-and-forth circular motions to clean the cap.
• Focus on removing fingerprints, stains, and debris without using excessive pressure.
• Pay attention to detail, ensuring not to damage the cap's finish.
• Buff the cap using a clean microfiber towel in circular motions to achieve a clean shine.
• Repeat the process for any remaining center caps, cleaning both the front and back sides.

Step 3: Reinstalling the Center Cap:

• Hold the center cap with the logo facing the valve stem's direction.
• Place the cap onto the wheel, aligning it with the designated area.
• Gently tap the outer perimeter of the cap using your palm to start seating it.

• SEM-39143
• SEM-39143K
• SEM-39143PK
• SEM-39143PK2