Ford Lightning Logo Carpeted Floor Mats
A fresh set of carpeted floor mats is a great way to spruce up the interior of your F-150 Lightning. If you have stained floor carpet but don't want the hassle of replacing it, just get yourself a set of these ACC carpeted floor mats and cover up that old stained carpet! On the other hand, if you have already replaced the carpet in your Lightning don't just reuse the old stained mats that you had before! What a huge waste to go through the trouble of installing fresh carpet just to cover it up with ugly and stained carpet mats. When you install new floor carpet treat yourself to a new set of floor mats that will not only be a great color match for the replacement carpet but will also protect it from wear in the future.
Lightning Logo Dimensions
Width: 7 1/2 in.
Height: 3 in.
ACC Floor Mats
Auto Custom Carpet is the world's leading manufacturer of floor mats. We are proud to offer such high-quality floor mats for your Ford SVT Lightning. All floor mats are made by Auto Custom Carpet to match the replacement carpet that we also offer. Die cut like original to insure a perfect fit and finish and made of long lasting cut pile carpet with vinyl trim.
ACC - Has You Covered
ACC was born in 1977, and they’ve been on an epic journey ever since. From their beginnings as an Auto Trim Business to becoming the world’s largest manufacturer of Automotive Flooring products, they’ve tried to stay true to their core principles. Deliver exceptional products made in the USA. Strive every day to be better than the day before. Do it faster than anyone. They are very grateful to the millions of customers who trust them each year and for joining them on this awesome ride. They hope that you’ll continue to be a part of their story.
Adding a new set of carpet or floor mats drastically improves the look of your 1979-2018 Mustang or 93-04 Lightning. If you have stained, ripped, or torn carpet ACC has just what you need to restore your interior to a brand new factory look. Featured in most OEM colors, you can easily get the matching colors you need for your project.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Pattern
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
The centerbore of the wheel is the opening in the middle of the wheel, surrounded by the lug holes. This opening helps to center the wheel to the hub. Its diameter is typically measured in millimeters (mm) and varies in size depending on vehicle application. Manufacturers approve up to a 1% variance in tolerance to pass wheels during inspection.