1986-93 Mustang Anderson 3.5" Power Pipe - Naturally Aspirated 5.0 by Anderson Ford Motorsports

1986-93 Mustang Anderson 3.5" Power Pipe - Naturally Aspirated 5.0

If you're rocking a Mustang 4.6/5.0, then you need better flowing intake pipes! Look no further!

Item #AFM-AF0105C
MPN# AF-0105C

Everyday Low Price: $299.95

Low Stock Only 1 available. Ships tomorrow!
 This item is returnable. Details

Free Shipping over $99

 Add to Cart

This product cannot be sold or shipped to the state of California. More Details


  • Increased Air Flow
  • Cooler Air Inlet Temps


  • 3.5" Mandrel Bent Construction
  • Ceramic Coated Inside & Out
  • Re-Locates Air Filter & Air Meter Outside The Engine Compartment

 What's in the Box

  • (1) Power Pipe Assembly
  • (1) Straight Rubber Connection Tube
  • (1) 90º Rubber Connection Tube
  • (4) Hose Clamps

Anderson Power Pipe
This Anderson Naturally Aspirated Power Pipe® is designed for Pro-M 77/80 shorty meter & Abaco 85mm DBX on 1986-1993 Mustang 5.0L applications. Anderson Power Pipes feature Mandrel bent 3-1/2" Ceramic coated (inside and out) pipe that puts the mass air and air cleaner in the inner fenderwell for a cooler intake charge for added H.P. Additional benefits of the Power Pipe is better drive-ability for Mustangs with bigger profile camshafts.

Anderson Quality
AFM Normally Aspirated Power Pipes were developed because of the need for higher volume, better flowing intake pipes needed with the higher RPM 4.6/5.0 and the bigger cubic inch 347/408. With the volume of air these engines need, the small factory rippled intake pipes are too restrictive and the cold air intake pipes are too small of volume. They rely on the cooler intake charge to gain H.P., which cannot be chassis Dyno tested. AFM dyno's each Power Pipe® to verify H.P. gains. The mass air is in the inner fenderwell, but we do not rely on the cooler intake to make the extra H.P. We do it in design and testing.

Installation Note
Comes with inlet to fit 75mm and smaller throttle bodies. Does not include Mass Air Meter or Air Cleaner. This will NOT fit a 90mm throttle body.

-Fits 1986-1993 Mustang 5.0

This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer

Anderson Ford Motorsports Warranty - Click Here

  • Ford Mustang - 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
  • Engines: 5.0
  • 1986-1988 Mustangs will require a mass air conversion for proper installation

California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm-

About This Brand

Anderson Ford Motorsports
Anderson Ford Motorsport was started in 1989 to meet the growing demand of Mustang performance parts. Since then, they have made a name for themselves in the business and have grown to be one of the largest Mustang performance centers in the Midwest. They produce and manufacture their own line of specialty parts to give your Mustang more horsepower, torque, and performance. With a wide selection of cams, camshafts, valve springs, and other valve train components, Latemodel Restoration is your #1 source for Anderson products.
Add to Cart