SHOP

BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04 by BMR


BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 79-04

Eliminate 28.5lbs off your 1979-2004 Mustang's front end while increasing room for aftermarket power adders with this standard hammertone k-member from BMR!

Item #BMR-KM731H
MPN# KM731H

Everyday Low Price: $369.95

In Stock
 This item is returnable. Details

Free Shipping over $99

 Add to Cart

× close

  • Ford Mustang - 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
  • Engines: 5.0, 5.8
  • Ford Mustang - 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
  • Engines: 5.0, 5.8

Application

  • 1979-1995 Ford Mustangs w/302 pushrod (5.0L) and 351 pushrod (5.8L)

Modified Application

  • 1996-2004 Ford Mustang w/302 pushrod (5.0L) and 351 pushrod (5.8L)
 

REQUIRED PARTS:

  • Requires the use of coil-overs. 
  • Requires the use of caster camber plates.
  • 1979-1984 Mustang owners will be required to use 85-04 rack bushings.
  • 1979-1993 Mustangs will require control arms BMR-AA035H. Traditional coil springs can no longer be utilized with this k-member as it does not feature an upper spring perch.
  • 1994-2004 Mustangs will require control arms BMR-AA041H. Traditional coil springs can no longer be utilized with this k-member as it does not feature an upper spring perch.
 

Product Notes

  • Factory and aftermarket engine mounts may have alignment pins that can cause fitment issues. Removal of the alignment pin might be necessary for correct mating of engine mount to k-member.
  • Clunks, squeaks, and pops can be normal occurrences with coil-over setups
  • Coil-over conversion may reduce the area between the strut and wheel. High positive offset wheels or wide wheels may have clearance issues between wheels/tires and coil-over setup.
Made in the USA

 Benefits

  • Reduces Front End Weight By 28.5lbs
  • Maintains Factory Engine Height
  • Increases Weight Transfer
  • Improves Traction
  • Made In The USA

 Features

  • 1.5" DOM Tubing & 3/16" Steel Plate Construction
  • Black Hammertone Powder Coated Finish
  • SN95 Steering Geometry
  • Weighs 20lbs
  • BMR Quality

 What's in the Box

  • (1) Tubular K-Member
  • Installation Hardware Pack

1979-2004 Mustang BMR Standard Tubular K-Member - Coilovers

Reduce front-end weight on your 1979-2004 Mustang and enable additional clearance for further performance modifications with this tubular k-member from BMR! Proudly made in the USA with heavy-duty 1.5" DOM tubing and 3/16" plate steel, this unit weighs in at 20lbs. By removing 28.5lbs of weight off of the front end of your Mustang, you will experience improved traction and weight transfer on the street and drag strip for the ultimate racing experience! Constructed with precise bends to reduce weight where it isn't needed, BMR went the extra mile and manufactured this tubular k-member to retain factory engine height. Steering geometry from the SN95 Mustang chassis was also factored in to improve bump steer conditions. This k-member is designed for the use of coilover struts and the corresponding control arms. Traditional coil springs can no longer be utilized with this k-member as it does not feature an upper spring perch. Finished in a durable black hammertone powder coating, this k-member will resist corrosion as good as it looks and performs!
 


BMR Warranty - Click Here


California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand


BMR
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!
Add to Cart