BMR Tubular K-Member & Control Arm Kit - Red
Reduce the overall weight of your Mustang's front end while improving steering response with this BMR tubular k-member and control arm kit! Eliminating excess weight from the front end of your Mustang allows for improved weight transfer and also increases traction. The tubular design of this k-member kit frees up additional room in the engine bay for aftermarket power adders such as long tube headers, a supercharger, or a turbo! BMR designed this completely bolt-in tubular k-member and control arm kit with precision to ensure an exact fit for your Mustang.
Standard Tubular K-Member - Coilovers
Proudly made in the USA with heavy duty 1.5" DOM tubing and 3/16" plate steel, this unit weighs in at 20lbs. By removing 28.5lbs from the front end of your Mustang, you will experience improved traction and weight transfer on the street and drag strip for the ultimate racing experience! Constructed with precise bends to reduce weight where it isn't needed, BMR went the extra mile and manufactured this tubular k-member to retain the factory engine height while utilizing the steering geometry from the SN95 Mustang chassis to improve bump steer conditions. This k-member is designed for the use of coilover struts and the corresponding control arms. Traditional coil springs can no longer be utilized with this k-member as it does not feature an upper spring perch. Finished in a durable red powder coating, this k-member will resist corrosion as good as it looks and performs!
Tubular Front Control Arms - Standard Ball Joint
These tubular front control arms are manufactured using 1.50" & 1.25" DOM steel, reducing the amount of material used while also increasing the strength of the control arms. BMR equipped this set of control arms with heavy-duty ball joints and greaseable, 95-durometer polyurethane bushings that reduce road noise and vibration. A fluted bushing design allows grease to coat the area of the bushing where the most friction occurs, providing quiet operation of the control arms. Proudly made in the USA, BMR specifically designed these control arms for use with coilover shocks to improve performance on the street, the drag strip, or the road course. BMR coated these quality control arms in a red powder-coated finish for long-lasting durability and an appealing appearance.
Coilover shocks are REQUIRED with this tubular k-member and control arm kit as there is no standard coil spring cup provision.
Fits 1979-1995 Mustang With 302 Or 351 Based Engine
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!