LMR will be closed for the Memorial Day holiday - Monday, May 30th.
Tighter Rear Suspension
Adjustable Pinion Angle
1 5/8" .120 wall DOM tube
TIG Welded Construction
Powder Coated Finish
What's in the Box
(1) Adjustable Control Arm
(1) Polyurethane Bushing Set
Install Instruction sheet
The single upper control arm for your 2005-10 Mustang is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is MIG welded. They are available with polyurethane bushings or spherical bearings. Available in Black Hammertone or red powdercoat.
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!
4.6L V8 Automatic transmission; Has Steeda cold air intake, bunch of appearance mods, sway bar kit, hood vents; I originally owned a Silver 2005 stock V6, but the original owner, Brittany Burns, passe...