Benefits
- Compatible with 2.5"-3" Lifts
- Corrects Pinion Angle
- Simple Installation
Features
- Steel Construction
- 4 Degree Angle
- Black Finish
Leaf Spring Axle Shims- 4 degreesEnsure your pinion angle is correct on your lifted 1992-1996 Ford Bronco with these 4-degree leaf spring axle shims! Anytime you modify your factory suspension geometry, issues can arise; correcting your pinion angle is one major issue when adding a lift kit to your OBS Truck. This can cause driveline vibrations and potentially damage the driveshaft u-joints if left uncorrected. By using different thicknesses of shims, you can fine-tune the pinion angle to achieve optimal alignment.
Designed to work on lift kits ranging from 2.5" to 3" on your OBS Truck. They are manufactured from a durable steel construction drilled out for the axle locating pin and a protective black coating to prevent rust. The wedge-shaped 4-degree angle shim is placed between the rear axle housing and the leaf spring to slightly rotate the pinion angle up or down, adjusting.
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
