Spoiler Drill Guides

Spoiler Drill Guides
Accurately drill the mounting holes, and install a new spoiler on your Mustang with the help of these spoiler drill guides. Installing a new spoiler on your Mustang is a great way to add a unique touch, but drilling holes into your pristine paint can be daunting. With these drill guides, you can ensure the new mounting holes are in the correct spot the first time, giving you a perfect fit. Made from a durable plastic polymer with a locating dowel to align the bolt holes with long tabs to extend past even the widest of wings. A built-in 1/8" drill bit hole in the locating tab gives you a perfect alignment to drill a pilot hole. Four drill guides are included so you can quickly mark the locations of multiple mounting points simultaneously.

Easy Spoiler Installation
Place the locator strips into the mounting holes in the spoiler, and use small pieces of masking tape to hold them in place. Place the spoiler on the deck lid and align it to the proper position using existing mounting holes, if applicable. Using masking tape, secure locator strips to the deck lid, remove the spoiler by lifting straight up, leaving the strips still secured to the deck lid. Use a 1/8" drill bit to drill through the locator strip holes and into the deck lid, then remove drill guides. Finally, open the holes to the appropriate size for the hardware, leaving enough room for minor adjustments.