Benefits
- Improved Braking Performance
- Very Quiet
- Gentle On Rotors
- Extended Pad Life
Features
- Ferro-Carbon Compound
- Minimal Fade At High Temps
- 750° Max Heat Range
What's in the Box
- (1) Set HPS 5.0 Front Brake Pads
Hawk Performance Replace the weak factory brake pads on your 2015-2023 Mustang Ecoboost and V6 with this Hawk HPS 5.0 front brake pad kit! The HPS 5.0 compound is great for ABS-equipped Mustangs as it has just the right amount of torque. Too much brake torque and your ABS go into ICE mode, too little and there is no improvement to the product. Pedal feedback, Noise, brake torque, and dust control was Hawk's goal with the High-Performance Street 5.0 compound, and they delivered! Hawk's HPS 5.0 brake pads allow the driver to challenge themselves and their S550 with a new and unique driving feel! These pads are gentle on rotors while remaining virtually noise-free!
HPS 5.0 Compound Hawk HPS 5.0 brake pads are perfect for high-performance streetcars that's purpose is daily or weekend driving. While they will perform on the occasional track visitors, their main purpose is a slightly more aggressive pad overstock applications.
Fitment Note- Will NOT fit Performance Package. Application
- Fits 2015-2023 Mustang Base Ecoboost and V6
Important Installation Instructions
All brake pads require a burnishing or bedding-in procedure to achieve optimal performance and durability. Follow the steps below to bed your new brake pads properly.
Bed-in / Burnishing Instructions:
- After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH, applying moderate pressure.
- Make an additional 2-to-3 hard stop from approximately 40-45 MPH.
Do NOT drag your brake pedal!
- Allow at least 15 minutes for the brake system to cool down.
- After Step 4 is completed, your new brake pads are ready for use.
Hawk Performance Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
