Benefits
- Gentle On Rotors
- Extended Pad Life
- Improved Braking Performance
Features
- 750° Max Heat Range
- Ferro-Carbon Compound
- Minimal Fade At High Temps
What's in the Box
- (1) Set HPS 5.0 Rear Brake Pads
2015-2023 Mustang Hawk Performance 5.0 HPS Rear Brake Pads
Replace the weak factory brake pads on your 2015-2023 Mustang with this Hawk HPS 5.0 rear brake pad kit! The HPS 5.0 compound is great for ABS-equipped Mustangs as it has just the right amount of torque. Too much brake torque and your ABS goes into ICE mode; too little and there is no improvement to the product. Pedal feedback, noise, brake torque, and dust control were Hawk's goals with the High-Performance Street 5.0 compound, and they delivered! Hawk's HPS 5.0 brake pads allow the driver to challenge themselves and their S550 with a new and unique driving feel! These pads are gentle on rotors while remaining virtually noise free!
HPS 5.0 Compound
Hawk HPS 5.0 brake pads are perfect for high-performance street cars that's purpose is daily or weekend driving. While they will perform on the occasional track visit, their main purpose is a slightly more aggressive pad overstock applications.
Important Installation Instructions
All brake pads require a burnishing or bedding-in procedure to achieve optimal performance and durability. Follow the steps below to bed your new brake pads properly.
Bed-in / Burnishing Instructions:
- After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH, applying moderate pressure.
- Make an additional 2-to-3 hard stop from approximately 40-45 MPH.
Do NOT drag your brake pedal!
- Allow at least 15 minutes for the brake system to cool down.
- After Step 4 is completed, your new brake pads are ready for use.
Hawk Performance Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
