1979-1993 Mustang Direct Replacement Floor Pans
Until now the only way to repair rusted out or damaged floor pans in 1979-1993 (79-86 and 87-93) Fox Body Mustangs is to replace it sections or sides. This 5.0 Resto Foxbody full floor pan is the ultimate replacement for your original rotted out floor! This is a complete 1 piece full floor panel for 1979-1993 Mustangs with Manual transmissions. This full floor pan features the same stamped steel construction as the original. All of the holes are in their proper location which makes it easy to re-install interior components. The Floor pan is 57 3/4 inches Long and 52 inches wide. Since the full floor pan is a 1 piece design that means there is no guessing where you need to "splice" in the new panel.
- Fits 1987-1993 Mustangs
- Will Fit 1979-1986 With Relocation Of E-Brake Mounting Holes To The Correct Location
-Rear Seat Track anchor threads are 3/8 x 16 standard thread
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-10-29 Get rid of that ugly and unsafe cracked and rusted floor pan in your 79-93 Mustang! Over time the floor pans become rusted and cracked due to weathering and "spirited" driving - especially in parts for the country where you have snow. Often you will not discover rusted out floor pans and panels until you go and start an interior restoration project and remove the carpet.
No need to worry if you find damaged floor panels. Turn to the original Fox Mustang restoration company - 5.0Resto. We have a full line of Mustang floor pans, reinforcement panels, plug, grommets and hardware. Get your Pony full restored with LatemodelRestoration.com and 5.0Resto!
Was happy with the gauge of steel, and the fit/original stamping,(alas made in Taiwan) my beef is advertisement says has ALL speed nuts/etc, it dont have the 2 studs for the radio/console bracket under HVAC controls, another beef is that it could be a couple inches longer(from firewall to rear), The rust on my 88 T Top had progressed 1.5" closer to firewall than pan had material for...in fact there is a factory seam Ford has where firewall meets pan, it dont even reach that...just had to add extra metal...but would have been nice to have some extra length for the price. one last note, it does not come with all the rubber/metal plugs, and the ONLY way to order them from Latemodel Resto is to buy a FULL body plug kit for $35 (#LRS-7993PG-K), however that is a body plug kit for the WHOLE car, I dont want to spend $35 for ALL the plugs for the whole car....firewall, hatch, etc when all I need is ones for the pan itesel, FYI Latemodel, you should make a kit for JUST the replacement floorboard for less cost, I jsut ended up going to a Pull and Pay and popped all the plugs out of wrecked cars(even newer models SN95, etc fit) for $2..
5.0 Resto - Dedicated To The Preservation Of The Fox Body Mustang
5.0 Resto® specializes in restoration and specialty parts for 1979-1993 Ford Mustangs. Using years of experience in the late model Mustang restoration and aftermarket industry, 5.0 Resto® is your source for anything Fox Mustang. While designing, and manufacturing several items such as 5-Lug Conversion Kits, weather stripping components and interior restoration items, 5.0 Resto® also uses many other name brand suppliers to provide problem solving products directly to the Fox Body Mustang community. As with any part branded as 5.0 Resto®, they stand behind all of these products to the fullest extent and have tested these products to ensure they live up to the quality and performance you have come to expect!