Benefits
- Prevents Air Box Leaks
- Replaces Warped Blend Door
- Restores Interior Comfort
- Eliminates Messy Foam Particles
Features
- Durable Foam Seals
- Aluminum Blend Door
- Factory Dimension & Tolerances
- Pre-Cut, Peel & Stick Sections
What's in the Box
- (1) Blend Door
- (1) Foam Seal
- (1) Securing Clamp
- (1) Retaining Screw
- (2) Recirculating Blend Door Seals
- (1) HVAC Box Plenum To Cowl Seal
- (4) Strips of Strip Caulk
- (1) HVAC Main Duct Seal
- (1) Blower Motor Foam Seal
- (2) Firewall Spacers
- (2) Retaining Nuts
- (2) Silicone Seals
Complete HVAC Box Seal KitRestore the HVAC box in your 1982-1993 Fox Body Mustang with this premium 5.0 Resto complete HVAC box seal kit! When replacing a heater core or blower motor in your Mustang, it is crucial to replace components that are worn, deteriorated, or falling apart. When removing and opening up the HVAC box, there are serviceable foam seals. 5.0 resto includes all of the major seals needed to refresh the HVAC box. So far as the provided seals eliminating the messy foam particles commonly found on the floorboard, creating the ultimate peace of mind. Remaking the factory plastic blend door that tends to warp and not fully seat against your HVAC box. All is backed by an industry-leading warranty, 5.0 Resto is proud to offer this high-quality temperature blend door kit for your Fox Body.
5.0 Resto Foam SealsDedicated to the preservation of Fox Mody Mustangs, the experts at 5.0 Resto have taken the time to meticulously recreate the hard-to-find items to restore every aspect of your Mustang accurately. To bolster the ultimate attention to detail, 5.0 Resto utilizes a thick black foam to recreate the seals. To provide a superior fit and finish, these seals are made with factory dimensions & tolerances, are pre-cut, and have a pre-applied adhesive on the back for a simple peel-and-stick installation! To hold up to the high temperatures under the dash from the heater, the durable strip caulk will resist melting and maintain a permanent seal between the two portions of the HVAC box in your Fox Body Mustang for years to come!
Where Are They Located?The first HVAC box seal is located between the cowl & the plenum of the box itself. Then, there are seals on both sides of the recirculating blend doors near the passenger side footwell. The main duct seal is located between the large plastic duct that spans the dash & the HVAC box itself. The blower motor seal is located under the dash between the HVAC box and the blower motor base. A high-temperature strip caulk will fill in the gap between the box's mating surfaces to seal it together.
HVAC Box Firewall Mounting HardwareConstructed of plastic from the factory, these spacers tend to break after becoming brittle with age. 5.0 Resto sought to resolve this issue by reproducing the spacers with a stronger polyethylene material that's built to last. The spacers are located between the firewall and HVAC assembly where the stud goes through the firewall, properly spacing your assembly to maintain the correct distance. The engine bay side of the mounting hardware is composed of two large flange-headed nuts that spread the load of the heavy assembly even better! The spacers are constructed from black, high-density polyethylene plastic; this plate is corrosion-resistant and resists impact better than the weak factory spacer. Durable steel large-flanged-hex retaining nuts with a protective black finish are also included to secure everything in place for a quick and easy installation.
5.0 Resto Products Limited Warranty - Click Here