SVE SBF EFI Engine Lift Plate 5.0L/5.8L by SVE Special Vehicle Equipment ®

SVE SBF EFI Engine Lift Plate
Easily lift, store, install, or remove your 5.0L or 5.8L OHV EFI engine with the Special Vehicle Equipment® engine lift plate. This plate is designed to be bolted to the lower intake manifold to provide a solid lifting point for a 5.0L or 5.8L OHV EFI engine. This SVE engine lift plate is manufactured with 3 different lift points to aid you with the installation and removal of your engine by giving you the perfect angle to get your engine installed. Using the farthest lift points will allow you to tilt the engine with the transmission installed to the engine at different angles, aiding in the installation or removal of your engine assembly. Not only can the SVE engine lift plate be used for the installation and removal of your engine, but it can also be left on the intake manifold to prevent foreign objects from falling into your engine during storage. The plate acts as a seal for your engine while you are working on the other areas of your vehicle.

SVE Quality Construction
Manufactured in the U.S.A. from strong 7 gauge steel, which is roughly 4mm thick, the SVE small block Ford EFI engine lift plate is designed to support the weight of cast iron SBF engines. The engine lift plate is powder-coated in a durable black powder coat to provide a long-lasting finish that will prevent rust for many years!

• This lift plate is designed to be installed to the lower intake manifold. This will require the lower intake manifold to be installed and properly torqued for proper operation.
• This lift plate will not work on carbureted lower intake manifolds.

• Stock Lower Intake Manifold
• Trickflow Lower Intake Manifolds
• Edelbrock Lower Intake Manifolds
• SVE Lower Intake Manifold
• GT40 Lower Intake Manifold
• 1993-1995 Cobra Lower Intake Manifold

SVE Products Limited Warranty - Click Here