Benefits
- Prevents Cam Walk
- Correct Thickness
- Ensures Proper Camshaft Tolerances
Features
- Direct Replacement
- Steel Construction
- Retains Oil Valley Notch
What's in the Box
- (1) Camshaft Thrust Plate
Camshaft Thrust Plate
Ensure proper cam tolerances and prevent cam walk in your 1979-1995 Mustang with this thrust plate! Cam walk refers to the forward or backward movement of your cam within the block. The telltale signs of cam-walk are a worn thrust face on the block (if the movement was backward) or a scored timing chain cover, and excessive wear of the cam's distributor drive gear (if the movement was forward). Cam walk is a common occurrence found in roller cam setups and is caused by your engine block having its tappet bosses bored out of square with the cam bearing bore, causing the roller tappets to thread the camshaft in or out, depending on the direction of rotation. This is a normal occurrence for roller motors but is pretty much non-existent in non-roller setups. The cam thrust plate is designed to wear out and sacrifice itself to save your timing cover from cam-walk. After a long service life spanning many years & tens of thousands of miles, your camshaft thrust plate will probably need replacement during your camshaft install or engine rebuild. This Mustang Camshaft Thrust Plate is made from cast iron & is an OE-type direct replacement for your Mustang's 5.0L engine.
Applications
- Fits 1979-1995 Mustang 5.0