1999-2004 F-150 SVT Lightning PowerStop Z36 Brake Pad Kit - Front - Carbon-Ceramic by PowerStop

Enhance the braking capabilities of your 1999-2004 F-150 SVT Lightning with this StopTech Z36 brake pad kit!

Item #PS-Z36702
MPN# Z36-702

Everyday Low Price: $74.99

Low Stock Only 3 available. Ships tomorrow!

This item is not eligible for discounts or coupon codes.

This item is returnable. Details

Free Shipping over $99

Add to Cart

Add to Wishlist

Ford F-150 SVT Lightning - 1999, 2000, 2001, 2002, 2003, 2004

Brake pad break-in procedure:

Perform 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you’re forced to stop, either shift into neutral or give room in front so you can allow the vehicle to roll slightly while waiting for the light. The rotors will be very hot and holding down the brake pedal will allow the pad to create an imprint on the rotor. This is where the judder can originate from.
Then do 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot.
After this is complete, drive around for as long as possible without excessively heating the brakes and without coming to a complete stop (Try for about 5 minutes at moderate speed).
This is the cooling stage. It allows the heated resin in the brake pads to cool and cure.
After the brakes have cooled to standard operating temperature, you may use the brakes normally.

Benefits

Virtually Silent Braking
Reduced Stopping Distance
Perfect For Street/Tow Driving

Features

Hi-Temp Brake Lubricant
Stainless-Steel Hardware
Carbon/Ceramic Brake Pads

What's in the Box

(1) Set Front Brake Pads
(1) Hardware Kit
(1) Tube Hi-Temp Brake Lubricant

Z36 Brake Pad Kit - Front - Carbon-Ceramic
Upgrade the brake pads for your 1999-2004 SVT Ford Lightning with this PowerStop Z36 front brake pad kit for bolt-on braking performance! The compounds used in the PowerStop truck brake pads and shoes are intended to increase stopping power while reducing brake dust as well as noise. PowerStop rear brakes shoe compound uses a low-dust semi-metallic formula; the Z36 front pads reinforce the low-dust ceramic formula compound with carbon fiber. Both offer great fade resistance and offers extraordinary stopping power under the toughest conditions. PowerStop shoes retain constant wear and performance while ensuring a quick break-in thanks to OE-positive mold technology and a thermally scorched pad surface. Chamfered edges help optimize cooling, reduce wear, and suppress noise. Stainless-steel hardware, springs, a hold-down kit, adjusters, and hi-temp brake lubricant are included with the brakes making it easier to complete your brake job.

PowerStop Warranty - Click Here

California Residents:

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand

PowerStop set out to design a kit that removed the guesswork from shopping online for brakes by including everything in one box—pads, rotors, hardware and more. LMR offers PowerStop upgrade kits available for 1987-current Mustangs and Lightnings! Every brake pad uses a carbon-fiber ceramic material, providing a dust-free, noise-free, fail-free braking experience. Engineers work to ensure everything made is a direct bolt-on replacement for the original brakes, making it easy to upgrade your Mustang or Lightning braking performance! PowerStop has been providing a safe, problem-free performance brake upgrade since ’95 and is equally committed to eco friendly practices.